T1- Beech (small) Raise by 1 metre to clear neighbours shed roof

T1 - Oak - 17.5m/14.5m - To crown raise rouge extended branch ends dangling on the shed and fence to approximately 4.0m. To reduce 1 section of crown by 1.5-2.0m growing towards the house to reshape structure and to reduce 1 section of crown by 1.5m growing towards neighbours to reshape structure.

MAIN APPLICATION TREE WORKS 1 1, T1 & T2 - Copper Beech trees - in front garden next to the road. Aim - to lift the crown - clean and clear dead wood with a reduction of 10% 2, T3 - Norway Maple - drive way. Aim - to lift the crown, reshape/balance (currently lopsided) crown clean with a reduction of 10% 3, G1 - rear garden area 2 poor quality Fir trees next to the garage, west side of garden Aim - remove. 1 poor quality Fir tree beneath the Holm Oak, west side of garden Aim - remove Unidentified Evergreen tree - between Holm Oak and Silver Birch - west side rear garden. Aim - Crown reduction to reduce the overall size and shape thus allowing more light to the Silver Birch Tree. A reduction of 5ft. Silver Birch Tree - rear garden Aim - Crown clean to remove dead and dying wood to prolong life of the tree. Eucalyptus Tree - east side of garden Aim - Crown reduction by 10-15% its height and proximity to our eastern boundary. It's height has become a concern to our elderly neighbour at no 76a. Elder tree - east side of garden adjacent to neighbour no 78 fence and shed. Aim - remove as dead. We intend to plant new trees once the works have been completed. Currently we have 2 new apple trees and a Persian Ironwood tree to be added to the garden in G1. We are liaising with our arborealist about sourcing suitable trees.

T1 - Scots pine - mature tree , reduce lowest branch back to closest pruning point to main stem. The low branch is getting close to power line and causes lots of shadow for area, the tree would also look good for the branch reduction as the overall form and stem could be appreciated more T2 - Goat willow- small tree, around 5 meters in height, previously pollarded . Remove tree to ground level. Tree is very close to shed and has/will soon outgrown its location, roots found in drains which may become a problem in the future as it matures T3 - Silver Birch- medium size tree - remove small lower branches of around up to 5cm dia . 2 branches to remove to crown lift to height of 4-5 meters

T1- reduce leylandii hedge to 5m, T2- remove deadwood on Wellintonia, T3- remove low limb growing South over shed on a scots pine- T4 remove holly, T5 Remve deadwood on a silver birch and T6- remove deadwood on an oak