From 1st site plan, titled 'Cley Road Trees' T1 - Large cedar to crown raise to 4.2m. T2 - Large apple tree to pollard at approx 2.5m. T3 and T4 - Part of a line of long lapsed pleached lime. The rest of the line (G1) will be pollarded back to old cuts at 3.6m and an attempt made to re-establish the foliage of the lower crown to meet the original function of the pleached line of trees. T3 and T4 will be removed to open up the area near the house. T5 - Rosemary-leaved willow to pollard to approx half of current height and remove small stem to the right G2 - line of small trees along the boundary to prune to hold at approx current height (max 0.5m prune) T6 and T7 - Portuguese laurel and cherry laurel to reduce by approx 1/3 (up to 2.5m reduction) T8 - Large bay to reduce the height by approx 50% (up to 4m reduction) T9 - Tall bay to reduce by approx 3m. From 2nd site plan, 'Cley Road Trees 2' T10 and T11 - Sycamore and ash with low branches and close to neighbouring house to crown raise both trees to approx 6m. T12 - Ivy covered laburnum to remove to low stump.

T1 Birch - Reduce Canopy by 30% 4m to 2.8m in spread, providing clearance of 2m from phone lines. T2 Lime - Initially reduce lower canopy growing toward house by 30% 5m to 3.5m, providing 1.5m clearance from house. Subject to consent from neighbour (tree owner) in future carry out a 30% reduction of the entire canopy of tree, providing clearance from buildings and a balanced canopy. T3 Beech - Reduce height of tree from 8m to 6m

Tree 1. Oak tree to South of House - reduce by maximum of 1/3. - Trees 2 and 3. 2 x white poplars to north west of House - re-pollard to previous pruning point.

T1- Maple, Tree diameter- 0.4m Tree height- 4.5m, Tree Width- 3m, requesting permission to fell tree due to close proximity to the house, with potential worry of house foundations due to root system. T2- Cherry, Tree Diameter- 0.4m, Tree height 4.5m, Tree Width- 3m, requesting permission to fell tree due to close proximity to the house. Apparent damage is being caused to path between both house and T2. T3- Cherry Tree- Diameter- 0.4m, Tree height 4m, Tree width- 2.5m, requesting permission to fell tree due to close proximity to the house, with potential worry of house foundations due to root system. T4- Prunus, Tree diameter- 0.35m, Tree Height 2.5m, Tree width- 2m. Tree is dead requesting permission to fell.

Beech Trees x 8 standing approx 50ft from house and 65ft tall, I would like to lop 18ft off the top the trees for safety reasons

Crown raise oak next to house 5 meters from the road to stop braches from hitting lorries etc - 1-2 meters away from house - 2 meters crown raise on garden side

T1 - Laurel Hedge to be reduced in height by 2m and trim side back - T2 - Laurel trees to be reduced in height to approximately 6ft from ground level - T3 Holly tree to be reduced in height by approximately 1.5m and trim side back in the Shape allowing more space for maple tree -T4 Bay tree in front of house to be re trimmed top and sides back to previously trimmed to give a good shape.

T1 - Sycamore (currently approximately 13m in height) - Reduce west side of canopy by up to 3.5m to provide adequate clearance from side of house T2 - Sycamore (currently approximately 13m in height) - Reduce over extending branches on west and south sides of canopy to increase light levels in garden and increase clearance over wall/outbuilding T3 - Beech (currently approximately 14m in height) - Reduce whole canopy by up to 3.5m (mainly over extending branches) to increase clearance from neighbouring trees and increase light levels in garden

T1 - Cypress (currently approximately 8m in height) - Reduce height by approximately 3m to provide adequate separation from neighbouring Tree of heaven T2 - Tree of Heaven (currently approximately 12m in height) - Reduce west side of canopy by approximately 4m and crown raise to 4m to provide clearance from summer house T3 - Sycamore (currently approximately 12m in height) - Reduce east side of canopy by approximately 3m to increase light levels in garden

T1 Lime - Reduce and shape crown from approximately 5.8 m to approximately 4 m radial -T2 Scots pine - Reduce crown spread to east from approximately 5.5 m to 4 m - T3 Scots pine - Reduce crown spread to east away from house from approximately 8 m to 5 m -T4 Sycamore - Reduce crown spread to east from approximately 7 m to 5 m.