Minor material amendment to planning permission 22/P/2516/FUH (Proposed erection of a single storey rear extension and loft conversion with front and rear dormers) to allow for the raising of the roof height by a maximum of 500mm, increase the size of the front gable over the front bay window, addition of two rooflights (one on either side of the South & North Elevation) and to raise the height of the rear dormer by 400mm.

Non material amendment to application 22/P/1201/FUH (Proposed erection of a single storey rear extension to existing dwelling to relocate the bedrooms from the lower ground floor.) to allow for the removal of some proposed windows and amendments to some window types and positions. Removal of existing chimney.

Non material amendment to application 23/P/0421/FUH (Proposed erection of a two storey extension to the South elevation, single storey extension to the West elevation and internal structural alterations.) to omit the new door to the kitchen on the east elevation and replace it with a window instead.

Minor material amendment to permission 14/P/0077/F (Change of use from mixed use of office and stores to D1 use on ground floor and a dwelling (C3) at first floor level. Erection of a single storey rear extension to provide store for ground floor D1 use and hall entrance to first floor flat) to allow for changes to the windows and porch (retrospective)

Non material amendment to application 22/P/3065/FUH (Proposed Erection of a 2 1/2 Storey extension to the South-East Elevation, single storey link extension between the dwelling and existing garage. Proposed raising of roof ridge height by 0.5m and subsequent loft conversion. Internal and external structural alteration including, installation of 6 No. Velux windows, 5 No. Skylights, Replacement of all external windows and doors and addition of 1 No. new window to the North Elevation at the first floor and creation of a side access door at ground floor level). To allow for the ommision of 2no. kitchen windows on the East elevation and replace with a single reeded/obscured window.

Non material amendment to application 22/P/2516/FUH (Proposed erection of a single storey rear extension, front porch extension and loft conversion with front and rear dormers.) to allow for the raising the roof ridge height by a maximum of 540mm, increase the size of the front gable over the front bay window and raise the height of the rear dormer by 400mm.

Non material amendment to application 21/P/1357/FUL (Demolition of existing dwelling, garage and outbuildings, erection of 1no. three storey dwelling, detached double garage and alterations to site entrance) to allow for a change of cladding on the garage, and the addition of and variation to some windows.

Non material amendment to application 21/P/3360/FUL (Demolition of existing bungalow and erection of a two storey dwelling with balcony to rear of house and solar panels on roof. Carport and attached garage. New boundary fences and wall with double gates to entrance.) to allow for all windows (excluding Velux windows) to be changed to Anthracite UPVC flush casement, bedroom 4 window size to be changed from size 1150mm X 1530mm to 1530mm X 1350mm, dressing room window to be changed from size 1125mm X 1530mm to 1530mm X 1350mm and Front porch Velux windows X3 MK12 780mm X 1800mm. to be changed for Velux windows X3. MK10. 780mm X 1600mm.

Minor material amendment to vary condition 2 (approved plans) of permission 22/P/1947/FUH (Proposed erection of a first floor extension and alterations to the existing bungalow. Conversion of the existing garage/store and workshop into an office) to allow erection of an external store to garage; new windows and doors to garage; changes to roof design and height of the garage. Use of garage building as two offices and storage to allow both applicants to work from home

Non material amendment to planning permission 20/P/2122/FUL (Erection of an extension to existing factory and warehouse premises; remodelling and expansion of vehicle parking and circulation areas and erection of a new gatehouse; replacement and remodelling of conveyor structure to the north of the main site) to allow for; amended Gypsum Store design, amended Calcination Workshop design, removal of maintenance space and compressor, amendments to previously approved pallet store and waste plasterboard store, new bearer store and hazardous waste store, additional flue, additional louvres, position and quantity of doors and windows, size and quantity of roof lights, removal of bore hole pump, sizes of various aspects e.g. Liquid Store, MCC Room 1, Substation Room 1, rationalisation of tree planting and additional planting e.g. to seating area