Tree Preservation Order Application to crown reduce 1no. Black Poplar (No 1220) by 3-5m. Removal of dead wood and crossed limbs. Cut back limbs closest to house by 2-3m, limb to East and South by 3-4m to lift crown. Crown lift to remove new growth to height of 4-5m. Thin new growth within crown to reduce impact of high winds (ratio of 1:4). Crown reduce 1no. Silver Birch by 2-3m, cut back branches overhanging fence by roughly 2m to North and East and lightly thin and clean crown removing crossed limbs and dead wood.

Trees in a Conservation Area: G1 Willow - Tie in loose growth and trim, T4, T6 Sycamore - reduce height by 2-3m, prune to balance crown, T5 Ash - option 1 re-inspect in the summer to check for signs of Ash dieback, option 2 Fell as close to ground level as practical, G2 Larch, Elm, Cherry - crown lift, prune back in line with high wire boundary fence to a height of 4m, G3 Laurel, Privet, Cotoneaster, Elder - Trim shrubs, T10 Yew - prune to give 2m clearance from the building and G4 Fruit trees- trim/prune and shape.

Trees in a Conservation Area application: T1 - Remove cherry tree; T2 - remove large tree leaning on the fence; T3 - Remove goat willow; T4 - reduce apple tree by 2m; T5 - reduce small apple tree by 1m; T6 - reduce large laylandii tree by 5m

Trees in a Conservation Area: T1 Lime - Cut back trees overhanging boundary, by maximum of 3m, T2 Horse Chestnut - Cut back branch overhanging fence and G3 Yew & Holly - Cut back trees overhanging boundary.

Trees in a Conservation Area: T1 Ash multi stem - remove a single stem leaning over the fence and T2 T3 Lime crown raise 6 metres

Tree Preservation Order application: 1 - Fallen Beech stem - cut up first 8m of stem (from Yew) into liftable sections and stack on top of bankside by log pile, leaving last 3-4m of stem in situ, 2 - Yew - tidy broken branch stubs and remove hanging broken branches from crown, 3 - Cherry - remove secondary limb growing towards adjacent property back to main stem, 4 and 5 - Sycamore - remove lowest branch over driveway back to main stem, 6 - Yew - trim back vegetation closest to drive by 0.5m up to height of 3m and 7 - Mixed trees/shrubs and Ivy - trim back all foliage to boundary wall/fence line to height of 3m over public footpath

Variation of Condition 2 (Approved Plans) on approved application 20/03816/VARYCO to allow changes to internal layout, external door and window positioning, construction of low gabion wall and omission of acoustic fence and the addition of tree planting in lieu of the acoustic fence

Trees in a Conservation Area: T1 Cherry (Fell), T2 and T3 Birch Crown lift to 3.5 meters and thin canopy by 20% volume, T4 Sycamore Crown lift to 3.5 meters and thin canopy by 20% volume and T5 Cypress Remove overhanging branches into garden above fence height.

Trees in a Conservation Area application: Semi Mature Ash (T1) with 2 large cavities in the trunk - remove to fence height (6ft) to avoid failure. Tree is in poor condition and is overhanging neighbour's driveway. Twisted Willow (T2) with excessive lean - reduce by 3/4m to reduce sail and make safe.

Trees in a Conservation Area: T1 Prune branches from gateway, T2,3,4 Fell to ground (option to retain T3 as habitat stump <6m), Tree group G1 All Fraxinus excelsior (Ash) trees within 8 metres of western boundary and boundary fence fell to ground (due to Ash die back), Tree group G2 Where required fell to ground trees with a stem diameter less than < 180 mmm at 1.5 metres above ground level Prune branches back from roadside verge and fence line, Tree group G2 Trees at south west boundary and refuse bin storage area, roadside branches to be pruned up to 3 metres above ground level Retained trees adjacent to Hillhead Road, prune roadside branches up to 6m. Tree group G3 Hanging branch and deadwood removal Post Storm Arwen damage sustained to any retained trees of site where required branches to be pruned back to suitable pruning point. All tree works to be carried out in accordance with BS 3998: 2010 Tree Work - Recommendations and Tree.