Variation of condition 2 (Approved Plans) to allow changes to window/door styles, site layout, construction of outbuildings/attached buildings, insertion of flues and replacement of approved chimney with flue on approved application 19/03358/FUL

Variation of condition 2 (approved plans) on approved application 23/00331/FUL to allow reduction of angle of roof pitch from 40 to 35 degrees, reduction in size of first floor feature window on South West corner of West elevation, replacement of timber infill above and below feature windows with natural stone, pergola to front of South elevation and adjustment to layout of solar panels on South facing roof

Variation of Condition 2 (Approved Plans) pursuant to planning permission 21/00084/FUL in order to accommodate minor changes in design to roof and window locations/sizes

Variation of condition 2 (approved plans) pursuant to planning permission 20/01317/FUL for additional alterations including including dismantling and later reinstatement of wine bins, addition of lightning protection to external facades, and alterations to windows on east elevation.

Variation of Condition 2 (Approved Plans) pursuant to planning permission 22/03990/FUL to allow an increase to the eaves height by 300mm to the 'living' section of the dwelling at Unit 3, alteration of the facing material of the 'living' section of the building at Unit 3 to a natural stone cladding and changes to the fenestration of Unit 3 (amended description).

Variation of condition 2 (approved plans) on approved application 20/03237/FUL in order for 2 new windows (1 in each gable for more natural light) and propose some accommodation in the roof space with 2 dormers and 5 roof lights.

Variation of Condition 2 (Approved Plans) in order to amend design 1) Move the rear elevation wall of the dwelling, by 1.2M from the existing position, as the wall is located on the boundary between the applicant's and the adjoining landowners respective curtilages, the existing wall will then be reduced to 1.8M and capped as a boundary wall, with a new elevation wall position 1.2M from the wall, within the applicant's curtilage, 2) Change the alignment of the roof by 90 degrees from the previous approval, 3) Amend the property fenestration to suit the amended layout and reduce the overall level of glazing and 4) Amend the finish of the external walls from facing brick to synthetic render to fully weatherproof the structure on approved application 19/04655/FUL

Variation of Condition 2 (approved plans) on approved application 22/01089/FUL in order to both increase the dwelling footprint and reposition it 3.3m to the east and 1.0m to the south, add double flue chimney, reposition 2no. windows and increase car port size (amended description).

Variation of condition 2 (approved plans) on approved planning application 22/03694/FUL in order to make minor internal changes to plot 02 - Changes include dormers and moving windows to coincide with changes to plans. Plans and elevations also updated to show attached garage

Variation of condition 2 (approved plans) and 5 (surface water drainage) on approved application 20/01346/VARYCO (amends to dwelling approved under 18/04095/FUL) in order to move the dwelling 2.7 metres due south within the plot, ridge height amended to 600mm to mitigate a clash between the engineering of the roof fixings and steel lintels. Large store room required fire escape, switched the plant room and store room around, store room is on the north side allowing for a fire escape window to be integrated. The basement courtyard stair layout has been amended to allow for easier access from both sides of the dwelling. The utility window has been altered to allow for fire escape. Window 22 (non corner window in the Master bedroom) has been altered to incorporate a fire escape. Window 18 (corner window in bedrooom 3) has been altered to include fire escape. Drainage plan has been amended to include a sewage treatment plant and large attenuation tank.