Variation of Condition 2 (Approved Plans) pursuant to planning permission 22/03990/FUL to allow an increase to the eaves height by 300mm to the 'living' section of the dwelling at Unit 3, alteration of the facing material of the 'living' section of the building at Unit 3 to a natural stone cladding and changes to the fenestration of Unit 3 (amended description).

Variation of Condition 2 (Approved Plans) in order to amend design 1) Move the rear elevation wall of the dwelling, by 1.2M from the existing position, as the wall is located on the boundary between the applicant's and the adjoining landowners respective curtilages, the existing wall will then be reduced to 1.8M and capped as a boundary wall, with a new elevation wall position 1.2M from the wall, within the applicant's curtilage, 2) Change the alignment of the roof by 90 degrees from the previous approval, 3) Amend the property fenestration to suit the amended layout and reduce the overall level of glazing and 4) Amend the finish of the external walls from facing brick to synthetic render to fully weatherproof the structure on approved application 19/04655/FUL

Variation of Condition 2 (approved plans) on approved application 22/01089/FUL in order to both increase the dwelling footprint and reposition it 3.3m to the east and 1.0m to the south, add double flue chimney, reposition 2no. windows and increase car port size (amended description).

Variation of condition 2 (approved plans) and 5 (surface water drainage) on approved application 20/01346/VARYCO (amends to dwelling approved under 18/04095/FUL) in order to move the dwelling 2.7 metres due south within the plot, ridge height amended to 600mm to mitigate a clash between the engineering of the roof fixings and steel lintels. Large store room required fire escape, switched the plant room and store room around, store room is on the north side allowing for a fire escape window to be integrated. The basement courtyard stair layout has been amended to allow for easier access from both sides of the dwelling. The utility window has been altered to allow for fire escape. Window 22 (non corner window in the Master bedroom) has been altered to incorporate a fire escape. Window 18 (corner window in bedrooom 3) has been altered to include fire escape. Drainage plan has been amended to include a sewage treatment plant and large attenuation tank.

Variation of condition 2 (approved plans) attached to application 20/03535/VARYCO which sought permission for the variation of condition 2 (approved plans) on approved application 17/03816/FUL for new 4 bed dwelling with extension to existing private track, turning area and parking. Proposed amendments include extension of garage by 4 metres to include Plant Room for the Ground Source Heat Pump, new porch to front entrance and 3no dormer windows added to North elevation (amended description 20.03.23).

Variation of condition 2 (approved plans) on approved application 19/00014/FUL to allow minor amendments to elevations of new dwelling; removal of roof overhang to lobby front door, new flat section of roof to rear single storey wet room, repositioning of rear first floor landing window and removal of heads on windows and doors to rear and side elevations (as amended)

Variation of 17/01760/LBC to change approved plans (condition 2) for works to 1st floor of farmhouse including introduction of mezzanine, reinstatement of recess, relocation of new door opening to link and details of mortar (condition 3), windows (condition 8) and doors (condition 9) for internal alterations to barn and dwelling.

Variation of Condition 2 (Approved Plans) pursuant to planning application 18/02314/FUL comprising finished floor level raised to allow for a connection to the main sewer for foul water drainage; change in eaves and ridge levels higher than approved; change to position of dwelling further south within the plot; and changes to fenestration (AMENDED DESCRIPTION)