Trees in a Conservation Area: G1 Willow - Tie in loose growth and trim, T4, T6 Sycamore - reduce height by 2-3m, prune to balance crown, T5 Ash - option 1 re-inspect in the summer to check for signs of Ash dieback, option 2 Fell as close to ground level as practical, G2 Larch, Elm, Cherry - crown lift, prune back in line with high wire boundary fence to a height of 4m, G3 Laurel, Privet, Cotoneaster, Elder - Trim shrubs, T10 Yew - prune to give 2m clearance from the building and G4 Fruit trees- trim/prune and shape.

Trees in a Conservation Area application: T1 - Remove cherry tree; T2 - remove large tree leaning on the fence; T3 - Remove goat willow; T4 - reduce apple tree by 2m; T5 - reduce small apple tree by 1m; T6 - reduce large laylandii tree by 5m

Trees in a Conservation Area: T1 Lime - Cut back trees overhanging boundary, by maximum of 3m, T2 Horse Chestnut - Cut back branch overhanging fence and G3 Yew & Holly - Cut back trees overhanging boundary.

Trees in a Conservation Area: T1 Ash multi stem - remove a single stem leaning over the fence and T2 T3 Lime crown raise 6 metres

Trees in a Conservation Area: T1 Cherry (Fell), T2 and T3 Birch Crown lift to 3.5 meters and thin canopy by 20% volume, T4 Sycamore Crown lift to 3.5 meters and thin canopy by 20% volume and T5 Cypress Remove overhanging branches into garden above fence height.

Trees in a Conservation Area application: Semi Mature Ash (T1) with 2 large cavities in the trunk - remove to fence height (6ft) to avoid failure. Tree is in poor condition and is overhanging neighbour's driveway. Twisted Willow (T2) with excessive lean - reduce by 3/4m to reduce sail and make safe.

Trees in a Conservation Area: T1 Prune branches from gateway, T2,3,4 Fell to ground (option to retain T3 as habitat stump <6m), Tree group G1 All Fraxinus excelsior (Ash) trees within 8 metres of western boundary and boundary fence fell to ground (due to Ash die back), Tree group G2 Where required fell to ground trees with a stem diameter less than < 180 mmm at 1.5 metres above ground level Prune branches back from roadside verge and fence line, Tree group G2 Trees at south west boundary and refuse bin storage area, roadside branches to be pruned up to 3 metres above ground level Retained trees adjacent to Hillhead Road, prune roadside branches up to 6m. Tree group G3 Hanging branch and deadwood removal Post Storm Arwen damage sustained to any retained trees of site where required branches to be pruned back to suitable pruning point. All tree works to be carried out in accordance with BS 3998: 2010 Tree Work - Recommendations and Tree.

Trees in a Conservation Area: T1 - Mature Sycamore - Side prune to boundary fence (closest suitable growth points) to remove overhang. Crown lift 3 lower branches on park side of tree back to stem. Crown reduce by 3.5M and crown thin by 15% to improve air flow throughout crown and proportion in comparison to the garden

Works to trees in a Conservation Area: Sycamore T3 crown lift to 7m gutter height to bring canopy back to fence.

Works To Trees In A Conservation Area:- Sycamore (T3) - Crown lift to 7m gutter height bringing the canopy back to the garden fence