Tree Preservation Order Application - T1 - Sycamore - Reduce West side of canopy by up to 3m to reduce the weight of the branches, T2 - Remove lowest to branches on the west side of the crown to clear the property roof and T3 - Reduce the crown of the tree by up to 2m to clear parking area.

Works to Trees in a Conservation Area : Removal of T1 fir and lopping branches on T2 Ash tree, as touching neighbours roof at South View.

Trees in a Conservation Area Application: T1 large Bay Laurel: trim the sides of the tree by 1-2m and 2-3 meters off the top to come under the roof lines and telegraph line. T2 acer: trim 1m on one side and the top

Tree Preservation Order: Propose crown raise 3no. pine trees T1, T2 and T3 to remove lower lateral branches overhanging roof

Trees in a Conservation Area: To remove two stems from Ash tree boughs of which are approaching the roof.

Discharge of conditions 4 (Means of enclosure), 5 (Facing & Roofing Materials), 21 (street adoption), 22 (Estate Streets), 23 (Street management), 36 (Construction Method), and 44 (Tree Protection) on approved planning application 17/04653/VARYCO

Tree Preservation Order: Oak tree T59 - reduce length of branches overhanging the roof of the building, reshape all around the tree by 3 metres, lift the crown so that the first branch is approximately 3 metres from the ground, this would involve removal of three branches and removal of dead wood.

Tree Preservation Order: T1 - Ash - Crown Lift to provide 4 metres clearance from ground level. Branches on north west side encroaching on building prune up to 1 metre, T2 - Swedish Whitebeam - Crown Lift to provide 4 metres clearance from ground level, T3 - Sycamore - Crown Lift to provide 4 metres clearance from ground level and to clear sign T4 - Rowan - Fell to ground level and remove all arisings. T5 - Sycamore - On south west side of tree - prune 1 to 1.5 metres on branches near and overhanging the BT wires, T6 - Ash - On north-east side of tree - prune up to 2 metres, T7 - Sycamore - Crown Lift to 6 metres, T8 - Sycamore - Remove outermost branch fork that overhangs roof back to secondary branch at 1.5 metres above gutter height, T9 - Sycamore - Branches on south-east side of tree encroaching on building - prune up to 2 metres to reduce overhang and shape in to match the rest of the crown, T10 - Sycamore - Branches on south-east side of tree encroaching on building - prune up to 2 metres growth to reduce overhang and shape in to match the rest of the crown

Tree Preservation Order Application: T6 Sycamore - Crown Thinning no more than 30% of the leaf area, in addition an element of crown lifting is required to remove the branch which touches on the garage roof.

Tree Preservation Order Application: T6 Cherry Fell, T10 Silver Maple Crown reduce to 6-7m above ground level, reshaping crown to maintain balanced flowing crown shape, T14 Lime 2m height regrowth from stump. Dead Sorbus sp. Noted to South side of T14, remove dead Sorbus, T22 Oak Selective prune to remove storm damage branches and remediate branch stubs. Remove dead wood >25mm diameter, T26 Oak Crown reduce tree to approximately 12-15m above ground level and prune to maintain flowing crown shape, T31 Oak Crown reduce tree to approximately 7m above ground level and prune to maintain flowing crown shape, T36 Beech Clear storm damaged branching from crown. Undertake remedial pruning to T36 to prune back any stubs and damaged branching, T37 Scots Pine Reduce to 8m standing stem (wildlife monolith), T44 Beech Selective prune to trim low branches over driveway to maintain 3-4m clearance to ground level, T45 Goat Willow Selective Prune to give 2m clearance of branches to the roof apex, T46 Beech Selective Prune to give 2m clearance of branches to the roof apex, T47 Goat Willow Selective Prune to give 2m clearance of branches to the roof apex, T48 Goat Willow Fell to near ground level, T49 Robinia Fell to near ground level, T50 Western Red Cedar x3 Fell/clear x3 trees near to ground level and T51 Scots Pine Fell to near ground level.