MODIFIED SPECIFICATION FOR THINNING SEE CONDITION 2 T1. 1x English Oak tree located in the front garden of 2 Warren lodge. Crown thin by 20% and remove major deadwood. Remove epicormic growth on the main stems up to a height of 5-6 metres. Reduce selective lateral branches in by 1-1.5 metres to give a better shape, also reduce back from the house by 1-1.5 metres to suitable secondary growth points to reduce the amount acorn litter on the house roof. (see photos attached with areas to be reduce back clearly marked in red.) The objective of this work is to provide more light into the property of 2 Warren lodge, reduce the amount of acorn litter on the house roof and to give the tree better aesthetics.

T1 Oak- Reduce lateral branches overhanging 14 Victoria road by 2m to suitable growth points. Roof has recently been replaced and tree is dropping a lot of debris. Pruning will decrease overhang and prevent future damage.

Lime (rear garden RHS) - Re-Pollard back to previous pollard points, including the removal of all basal growth and epicormic growth on trunk. Remove any deadwood located on main 'tree framework' once re-pollarded. - Lime repollard is good arboricultural practice as regrowth is established and sizeable. 2. Eucalyptus (rear garden by patio area) - Remove major deadwood greater than 25mm diameter and reduce canopy closest to house by up to 2.5m to increase gap between tree canopy and property.- Eucalyptus. Deadwood removal and cut back to increase clearance from property roof. 3. Ash (rear garden LHS by veg patch) - Remove the lowest limb over neighbours garden, back to union with trunk.- Ash. Removal of low hanging branch over neighbours garden. Essentially a crown lift.

G1 - Group of saplings and semi mature trees (Ash and Sycamore) - Cost to crown lift to 4.0m over the parking areas and garage roof. The trees will be reduced back by 2.0m up to a height of 8.0m (as high as can be reached from ladders) G2 - Group of saplings and semi mature trees (Ash and Sycamore) - Cost to crown lift to 4.0m over the parking areas and garage roof. The trees will be reduced back by 2.0m up to a height of 8.0m (as high as can be reached from ladders)

G1 - Group of Conifers - To reduce in width only on garden side (left hand side) by 1.5 - 2.0m whilst still maintaining greenery. The trees are touching the property and are causing damage to the roof.

Submission of a construction transport management plan pursuant to condition 9 of permission 22/02481/S73. The proposed development within this application is to remove the existing dwelling and redevelopment of the site as a residential scheme providing 2, five bedroom family homes set over two floors with occupied roof spaces. Variation of conditions 1, 4, 5, 6, 8, 9, 10, 11, 12 and 14 of permission 22/00047/F, approved drawing numbers, windows, trees, landscaping, parking and turning, construction transport management plan, electric vehicle charging, boundary treatments, energy and water efficiency statement and ecology.

T2. Goat Willow rear boundary - Crown Lift to provide 1 metres clearance from top of roof 10x5m - Works to prevent damage to shed and allow light into section of garden

Submission of a tree protection plan pursuant to condition 5 of permission 22/02481/S73. The proposed development within this application is to remove the existing dwelling and redevelopment of the site as a residential scheme providing 2, five bedroom family homes set over two floors with occupied roof spaces. Variation of conditions 1, 4, 5, 6, 8, 9, 10, 11, 12 and 14 of permission 22/00047/F, approved drawing numbers, windows, trees, landscaping, parking and turning, construction transport management plan, electric vehicle charging, boundary treatments, energy and water efficiency statement and ecology.

Submission of a tree protection plan pursuant to condition 4 of permisison 22/00059/HHOLD. New part-single, part-two storey rear extension; new garage block, and new roof and rooflights to existing garage.

This application is for the reduction of multiple trees and the reduction of one Magnolia tree.All trees are believed to be covered under a blanket and have all clearly been reduced in the past.The main reason for the reduction of the trees is to allow more light in and around the property and reduce leaf matter, moss and lots of dead branches dropping from the Ash trees damaging the cars and the garage roof.T1- Large Ash tree situated at the front of the property as you drive down your drive on the left side. Reduce the crown by 1.5m all round back to suitable growth points above previous pruning points and remove all dead wood. The tree is showing signs of early Ash with constant twigs and small branches dropping covering the driveway and grass verge.T2- Reduce the crown of the Cherry tree back to previous pruning points by reducing it by 1.5m all round to create a well shaped and balanced crown. Thin the crown by 15%.T3- Reduce the Ash tree next to the garage by 2-3m in height and prune selected lateral limbs to create well shaped and balanced crown The crown is showing signs of moderate Ash die back and has dropped 4 medium sized limbs landing on the garage roof below. The twigs dropping have blocked the gutters and the customer would like to keep the tree as long as possible without causing future damage to his property.T4-Reduce the crown of the large Oak tree by 2m all round taking it back to healthy growth points to create a well shaped and balanced crown. The crown is currently very dense and causing issues with lots of moss taking over the grass below. A reduction will help with leaf matter and sun light to the garden and property.T5- Beech, reduce the crown of the Beech tree by 1.5-2m all round, back to previous pruning to create a well shaped and balanced crown. The crown is very dense with small growth a 15% crown thin will allow more light into the garden and property while keeping the natural shape of the tree.T6- Remove the Magnolia tree i...