T1 Ash Carefully dismantle to the top of the fence utilising a Mobile Elevated Work Platform. 14x8m virtually dead ADB T2 Self set Sycamore Fell to as close to ground level as possible - 9x4m self set tree growing towards garage T3 Mixed broad leaf species alongside garage - Reduce all encroachment over roof to in line with side of garage 10x6m down to 10x4m to clear adjacent roof T4 Oak Laterally reduce all round by up to 2 metres and remove major deadwood greater than 25mm in diameter 18x18m down to 18x14m works to balance the crown, clear the building and driveway T5 Oak x 2 and self set Maples - Laterally reduce from over driveway by up to 2 metres 15x8m down to 15x6m works to clear driveway

Submission of Tree Protection Plan pursuant to condition 4 of permission 22/02709/F. Construction of two detached houses and a detached garage.

Yew (T1) - To reduce mature Yew tree located in the front garden by 0.5m over driveway to reduce encroachment. All branches will be pruned to appropriate growth points. All works are carried out to BS 3998: 2010 Tree work recommendations. A well balanced shape will be maintained. Yew (T2 ) - To section fell mature Yew trees located behind the garage area using appropriate rigging techniques, and or hand held cuts. The trees are causing damage to the paved areas. Thuja Plicata (T3 & T4) - To section fell 2x mature Thuja Plicata located by the side entrance using appropriate rigging techniques, and or hand held cuts. The trees are obstructing the side access and have been poorly reduced in the past. Cypress (G5) - To section fell 13x mature Cypress located along the left hand side boundary using appropriate rigging techniques, and or hand held cuts. The trees are causing excessive shade. Willows (T6 & T7) - To section fell 2x mature Willows located in the rear garden using appropriate rigging techniques, and or hand held cuts. Lawson Cypress (T8) - To section fell mature Lawson Cypress located at the rear of the garden using appropriate rigging techniques, and or hand held cuts.

Group of 5 mature trees on the boundary of 7 Kenneth Road with public footpath, comprising four Common Beech (T1 to T4) and one Field Maple (T5) as shown in the site plan. Specification is a 1.5 metre reduction in height of the group, with similar shortening-in of side growth away from the house and over garden. Prune back T1 and T2 Beech branches currently close to house guttering/roof to ensure clearance of 2 metres. Prune back T5 Maple branches currently touching the garden room roof to ensure clearance of 2 metres. In addition, prune back T1 and T2 Beech branches currently touching neighbour's (26 Cunningham Road) garage roof to ensure clearance of 2 metres.

G1 - Group of saplings and semi mature trees (Ash and Sycamore) - Cost to crown lift to 4.0m over the parking areas and garage roof. The trees will be reduced back by 2.0m up to a height of 8.0m (as high as can be reached from ladders) G2 - Group of saplings and semi mature trees (Ash and Sycamore) - Cost to crown lift to 4.0m over the parking areas and garage roof. The trees will be reduced back by 2.0m up to a height of 8.0m (as high as can be reached from ladders)

- 1. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x6m down to 7.5x5.5m encroaching on lawn area. - 2. Yew in rear garden behind Beech hedge / seating area. Crown Reduction. Reducing the height and spread of the tree by up to 4 metres, remove 1st low limb to crown lift over lawn. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 15m post 12m crown spread pre works 15m post 12m 6x2m down to 4.5x2m to maintain size. - 3. Repair holes in lawn area by rose bed in top corner of garden behind garage created while felling ash in neighbours. supply grass seed and approx 1 wheelbarrow worth of topsoil. 3. 7x5m damaging path and patio area. -5. Oak on boundary with Gatton road - Reduce limb growing through and spoiling the visual appearance of the adjacent Yew tree (item 4) to in line with fence Low 7? limb to reduce by approximately 5 metres. -6. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy and shorten 1 branch to the right. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x7m down to 8x5.5m works to improve the visual appearance. -7. Holly rear boundary - Reduce / trim all over to shape 4x4m down to 4x3m works to improve the visual appearance. -8. Mixed species rear garden RHS - Reduce / trim encroachment over lawn and remove dead Cypress to ground level 6x5m down to 6x4m encroaching on lawn

Submission of a tree protection plan pursuant to condition 4 of permisison 22/00059/HHOLD. New part-single, part-two storey rear extension; new garage block, and new roof and rooflights to existing garage.

Demolition of existing dwelling and associated outbuilding and erection of new detached two storey dwelling with basement and integral garage. Variation of condition 4 of permission 21/02406/F. Addition of a revised Tree Protection Plan.

This application is for the reduction of multiple trees and the reduction of one Magnolia tree.All trees are believed to be covered under a blanket and have all clearly been reduced in the past.The main reason for the reduction of the trees is to allow more light in and around the property and reduce leaf matter, moss and lots of dead branches dropping from the Ash trees damaging the cars and the garage roof.T1- Large Ash tree situated at the front of the property as you drive down your drive on the left side. Reduce the crown by 1.5m all round back to suitable growth points above previous pruning points and remove all dead wood. The tree is showing signs of early Ash with constant twigs and small branches dropping covering the driveway and grass verge.T2- Reduce the crown of the Cherry tree back to previous pruning points by reducing it by 1.5m all round to create a well shaped and balanced crown. Thin the crown by 15%.T3- Reduce the Ash tree next to the garage by 2-3m in height and prune selected lateral limbs to create well shaped and balanced crown The crown is showing signs of moderate Ash die back and has dropped 4 medium sized limbs landing on the garage roof below. The twigs dropping have blocked the gutters and the customer would like to keep the tree as long as possible without causing future damage to his property.T4-Reduce the crown of the large Oak tree by 2m all round taking it back to healthy growth points to create a well shaped and balanced crown. The crown is currently very dense and causing issues with lots of moss taking over the grass below. A reduction will help with leaf matter and sun light to the garden and property.T5- Beech, reduce the crown of the Beech tree by 1.5-2m all round, back to previous pruning to create a well shaped and balanced crown. The crown is very dense with small growth a 15% crown thin will allow more light into the garden and property while keeping the natural shape of the tree.T6- Remove the Magnolia tree i...

T1: Ash: Thin out internal growth by 20% all over: To allow more light into the garden. T2: Acer: Minor crown reduction: To keep contained within boundary. T3: Horse Chestnut: Cut back growth overhanging properties garage roof. T4: Ash: Remove 4 lowest limbs each limb approximately 30-40cm in diameter to allow more light into the garden and contain.