T1: Beech rear of building, crown lift over carpark and path to 3m and lateral reduce back from building to ensure a 3m clearance T2: Hornbeam front carpark, crown lift to 3m over parking G2: Lime and cotoneaster, right handside of flats, lift all round to 3m and ensure a 3m clearance from building plus mapping and photos

Oak (T1) - To reduce mature Oak located in front of the right hand side block of flats back on building side by 2.0m (previous reduction points) to reduce the encroachment towards the building. All branches will be pruned to appropriate growth points. All works are carried out to BS 3998: 2010 Tree work recommendations. A well balanced shape will be maintained. The tree is starting to get to close to the building.

AMENDED SPECIFICATION SEE CONDITION 2 Rear of Flats by Parking Bay number 11, T1 - Wellingtonia - Reduction of secondary limbs from the lowest limb overhanging parking bay number 11 to the edge of kerb line by a reduction of up to approximately 1.5 metres of the branch length, retaining young furnishing growth. Carry out climbing inspection and remove any broken or hung up branches. All items include removal of arising debris leaving site clean and tidy. The tree is located to the side of Churchill House adjacent to the car park area. Reduction of secondary growth from the low dominant limb to reduce the extent of the encroachment from the Parking Bay No11. To reduce the extent of foliage falling on to the vehicles which use this parking bay. To reduce the extent of Bird Mess on the vehicle.

SEE CONDITION 2 FOR APPROVED WORKS AND INFORMATIVE 2 FOR GENERAL GUIDANCE. T3 English Oak at front Reduce to previous crown reduction points. Height pre works- 18m post 15m, Crown spread pre works 10m post 7m, Reasons- to allow light onto garden area and flats at front of building.To maintain views out from flats

SEE CONDITION 2 FOR APPROVED WORKS. G1 Lime x 44 around perimeter Re-pollard at previous points at approximately 5 metres high (Approx 9m to 5m). Works required to allow light into flats in building

1 Yew LHS Crown Reduction - Reducing the height and spread of the tree by up to 1 metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8m x 6m to 7m x 5m Works to allow light into flats

The tree is a Copper Beech situated in the small communal garden at the front of the block of flat known as 18 Tower Road. The LPA already has clear details of location of the tree - TPO RE458. The tree is approximately 9m high and its branches are growing above the height of the block of flats which results in twigs and leaves falling onto the roof of the building which in turn causes problems with the roof and blocked gutters. The branches also provide rodents and squirrels with potential access to the roof and the building. The branches growing towards the building are now touching the building, blocking out light, and blocking gutters with leaves and twigs. The branches also provide potential access to the building to rodents and squirrels. The branches growing towards the public highway are now growing beyond the property boundary and over the public footpath. The tree is realistically only visible to a maximum of 5 - 7 households and as Tower Road is a quiet suburban road it viewed by very little highway traffic. Proposed works:- 1. Reduce the height of the tree by 2 m so that it is no higher than the beginning of the roof of the building; 2. Cut back the branches growing towards the building by 60 cms; and 3. Cut back the branches growing over the public highway so that they do not extend beyond the hedge bordering the property.

AMENDED PRUNING SPECIFICATION SEE CONDITION 2 AND INFORMATIVE 2 FOR APPROVED WORKS AND GUIDANCE. Prune 1 yew by lateral crown redcution. To clear roof and allow more light into flats