T1. Chestnut in far LH corner - treat stump to inhibit regrowth 8x6m safety works T2. Sycamore rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 10x8m down to 8x6m.

Pin Oak (LHS side of property, close to boundary) - Reduce the height and spread of the tree by up to 2.5m. The lower SE, S & SW (overhanging neighbouring property) laterals have been reduced heavily in the past in an attempt to pull into shape - reduce regrowth back to suitable live growth in line with remaining canopy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Remove any major deadwood over 20mm diameter. Suitable access for our tracked MEWP - take boards to protect lawn from track damage. Measurements: Pre works - 26x19m Post works - 23.5x16.5m.

T2. Oak rear garden - Evidence of old Ganoderma fruiting body at the base of the stem on eastern aspect, localised decay when tapped with acoustic mallet. Large vertical tear in upper eastern canopy (approximately 2 metres long and half a metre wide) on a predominant stem with a heavy lean to the north. Several wood pecker holes on internal stems at approximately 8 metres. Various historic tears throughout crown. Large over extended limb to the south east with historic tear at approximately 5 metres from main union. I recommend a partial Crown Reduction. Reducing the height and spread of the stem in the eastern canopy with recent tear by up to 1.5 metres and reducing the large limb to the south east by 1.5 - 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Inspection carried out from ground level using and acoustic mallet and metal probe.22x20m down to 22x18m works to prevent further failure of limbs

T1. Oak (front garden) - Reduce the height and spread of the tree by up to 2.5m, back to near previous points of reduction. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Remove epicormic growth off trunk up to main crown break union and remove major deadwood over 25mm diameter. 16x12m pre works, 13.5x9.5m post works. Good arboricultural practice and to allow more light into in 55&57 Wray Common Road

T1. Beech (neighbours tree, tag no.0795) - Included main union at 3m where trunk divides into two co-dominant stems. Reduce the lateral spread of the canopy overhanging the rear gardens by up to 3 metres. No height to be taken out of the tree. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Any major deadwood (over 25mm diameter) above the gardens is to be removed too. T2. Sycamore (neighbours tree, tag no.0796) - Suppressed tree with squirrel damage. Reduce overhanging encroachment back to boundary line and raise canopy over rear garden of no. 11 Charlwood Place to provide 3m ground clearance. Reduction of lateral canopy spread over private gardens to allow more light into properties. 19x12m to 19x9m.

T1. Plum group front boundary - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8x7m down to 6x5m encroaching on drive entrance 11. Yew rear garden of 23 - Crown Reduction. Reducing the height and spread of the tree by up to 1 metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth

1. Larch rear garden - Ganoderma at base and decay at 4 metres on main stem, Carefully dismantle to as close to ground level - 20m Tree extensive decay at base. 2. Yew rear garden - Crown Lift to provide 3 metres clearance from ground level on eastern canopy and reduce the low branches to the east and south by half a metre 9x7m Tree lift works to allow light underneath. 3. Oak rear garden - Crown Lift to provide 5 metres clearance from ground level - 18x16m Tree. Works to allow light underneath 5. Old Chestnut stump - Coppice at ground level and remove basal growth on adjacent Chestnut Regrowth from an old stump. 6. Sycamore rear LH corner - Remove basal growth - 18m tall tree. Works to allow access underneath. 7. Hazel rear garden LHS - Coppice at ground level 4m stool. Works to regenerate old coppice. 9. Beech rear LHS - Reduce the northern canopy by 1-2 metres and crown lift to provide 5 metres clearance from ground level. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth - 18x15m Tree works to reduce shadowing over lawn. 10. Hazel rear LHS (dead tree) - 7m stool dead. 12. Yew rear LHS - Crown Lift to provide 3 metres clearance from ground level 9x7m works to allow light underneath

AMENDED SPECIFICATION FOR T3 SEE CONDITION 2 T1. Chestnut front boundary - Crown bias to the north. I would recommend a Crown Reduction. Reducing the height of the tree by up to 2 metres and the northern canopy by up to 1 metre and reduce the protruding limb to the west by 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. 17x12m down to 15x11m works to balance and tidy the tree following the loss of the adjacent tree in previous storm. T2. Lime front boundary - Historically been reduced with approximately 6-7 metres regrowth from old points with obvious decay at these points, I would recommend a Crown Reduction. Reducing the height and spread of the tree by 3-4 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Raise crown over road to provide 5 metres clearance from ground level by the removal of secondary and sub-branches. 20x15m down to 16x12m works to alleviate the stress on the old decaying pruning points and allow light into the front of the property. T3. Cedar front boundary - Crown Thin. Removing selected branches in the upper canopy to reduce current density by up to 15% remove broken / damaged branches and major deadwood greater than 20mm in diameter. Raise crown over road to provide 5 metres clearance from ground level by the removal of secondary and sub-branches. 18x12m tree. works required to prevent further storm damage

T1 Common Horse Chestnut Crown Reduction - Reducing the height and spread of the tree by up to 8 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. To be reduced substantially due to decay to base of stem to South. Height pre works 17m post works 9m. Crown spread pre works 8m post 8m

T1 Copper Beech Crown reduce the upper canopy by 2 metres (Cut size's no greater than 50mm in diameter) and lower canopy by 3-4 metres (cut size's no greater than 70mm in diameter) to make crown more compact and tighten up low spreading limbs. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 25m post 23m Crown spread pre works 16m post 14m (all measurement are an approximate) T2 Holly hedge approx 7 clumps Reduce all by approx 2m beyond previous points (approx 5m reduction) Height 10 metres to 5 metres T6 Holly & Yew beside drive Crown lift / cut back off drive by approx 2 metres Works as part of ongoing hedge management to let light into garden