Pin Oak (LHS side of property, close to boundary) - Reduce the height and spread of the tree by up to 2.5m. The lower SE, S & SW (overhanging neighbouring property) laterals have been reduced heavily in the past in an attempt to pull into shape - reduce regrowth back to suitable live growth in line with remaining canopy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Remove any major deadwood over 20mm diameter. Suitable access for our tracked MEWP - take boards to protect lawn from track damage. Measurements: Pre works - 26x19m Post works - 23.5x16.5m.

T1 Copper Beech Crown reduce the upper canopy by 2 metres (Cut size's no greater than 50mm in diameter) and lower canopy by 3-4 metres (cut size's no greater than 70mm in diameter) to make crown more compact and tighten up low spreading limbs. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 25m post 23m Crown spread pre works 16m post 14m (all measurement are an approximate) T2 Holly hedge approx 7 clumps Reduce all by approx 2m beyond previous points (approx 5m reduction) Height 10 metres to 5 metres T6 Holly & Yew beside drive Crown lift / cut back off drive by approx 2 metres Works as part of ongoing hedge management to let light into garden

T1: Horse Chestnut - Crown reduce by up to 3m to previous pruning points. Crown thin 15% to reduce the risk of branch failure at previous reduction points. T2: Silver Birch - Crown reduce over extended lateral branches in top of crown by up to 3m. Reduce lateral branches by up to 1m to reshape. Crown thin 15%, risk management enabling the retention of this tree in a stable form. to allow more light into adjacent property.