(T2-455) - T5, Quercus robur, front garden - remove major dead wood, selective reduction by 4 metres to strong growth points, crown thin by 15% focusing on conflicting branches and epicormic. (T2-455) - G1, 7 x Quercus robur, left hand side of rear garden. G1, T1 - remove major deadwood, reduce limb over roof by 5 metres, crown raise 5 metres removing 2 lowest superficial limbs, crown thin by 10% focusing on conflicting branches and epicormic growth. G1, T2 - remove major dead wood, reduce 2 lowest limbs over building and chimney by 5 metres. G1, T3 - remove major dead wood (declining). G1, T4 - remove major dead wood. G1, T6 - remove major dead wood (garden side, Redbourne). G1, T7 - remove major dead wood (garden side, Redbourne). (T2-455) - G2, 4 x Quercus robur, right hand side of rear garden. G2, T1 - remove major dead wood, crown thin by 15%. G2, T2 - remove major dead wood, crown thin by 15%. G2, T3 - remove major dead wood, crown thin by 15%. G2, T4 - remove major dead wood, crown thin by 15%.

T1 Yew - Reduce height to approximately 1m below BT wire. Trim up to 5cm to shape and push back overhang up to 50cm from number 77 drive while maintaining sufficient growth. T2 Holly - Reduce in height by 3-4 metres to suitable growth and prune laterals up to 1.5m as required to maintain an aesthetically pleasing shape as part of a collective crown with T3,T4 and T5. Lift to 2.4m over footpath to maintain statutory clearance. T3 Holly - Reduce in height by 3-4 metres to suitable growth and prune laterals up to 1.5m as required to maintain an aesthetically pleasing shape as part of a collective crown with T2,T4 and T5. Lift to 2.4m over footpath to maintain statutory clearance. T4 Yew - Reduce in height by 3-4 metres to suitable growth and reduce laterals by up to 2m to suitable growth points to maintain an aesthetically pleasing shape as part of a collective crown with T2,T3 and T5. Lift to 2.4m over footpath to maintain statutory clearance. T5 Yew - Reduce in height by 3-4 metres to suitable growth and reduce laterals by up to 2m to suitable growth points to maintain an aesthetically pleasing shape as part of a collective crown with T2,T4 and T5. Lift to 2.4m over footpath to maintain statutory clearance. T6 x 2 Holly Stems - Showing some signs of declining growth. Fell to ground level to allow understory to re-establish in it's place and to allow more sustainable future management. T7 Holly - Reduce in height by approximately 3m to match height of adjacent bamboo. Trim over up to 20cm to tidy. G1 Western Red Cedars - Reduce line of cedars in height by approximately 6m utilising a 21m MEWP. Crown lift to give 2m clearance from garage roof. Proposed works are to ensure a good/safe clearance is maintained.

T1 - Oak - Gain a 2 meter clearance from rear roof of no 7. Crown raise to 3 meters not removing any major limbs. Finishing spread 9 meters no height to be touched.

T8 Western Red Cedar and Climber - Crown lift over the garden building to maintain a clearance of 1.5 metres back to suitable growth points. T9 Forsythia - Trim back the overhanging branches back to previous cut point which extend over the path and garage roof.

T4 - Beech - Prune the low branches that are becoming close to the roof back by 1 metre. T5 - Oak - Remove all major deadwood >20mm. T6 - Oak - Prune the lateral branches over the church roof to give a clearance of 2 metres from the roof. T7 - Oak - Remove major deadwood >20mm from throughout the crown. T8 - Oak - Removal of major deadwood >20mm and crown raise over the parking/garage area to 4.5 metres.

T1 - Beech - Carry out an overall crown reduction and rebalance of the crown. Reducing the tree in height by 2.5 metres and reducing the lateral spread by 1.5-2 metres. Prune branches impinging on the overhead BT wires to give a 1 metre clearance. T2 - Oak - Major deadwood present throughout the crown. Remove all major deadwood >20mm in diameter. Prune the low lateral branch which is nearly touching the front apex of the building by 2-2.5 metres to clear the building. T3 - Oak - A triple-stemmed tree at 1 metre. Remove major deadwood >20mm from throughout the crown. Reduce the low lateral limb extending towards the building by 2-2.5 metres to clear the roof.

Oak - lift all branches resting on roof of number 18 back to main branch, allow 2 m clearance from roof and chimney. Cut back lowest branch overhanging number 17 back to fork. remove 2x lowest branches that overhang footpath and remove all major deadwood.

Reduce the height of 2 Ash trees by 5 metres and shape (T1 & T2) Crown lift lower branches hanging over car park bays up to a height of 5 metres on 2 Hornbeams (T3 & T4) Remove 1 hanging dead branch from 1 Cypress tree (T5) Crown lift lower branches hanging over car park bays up to a height of 5 metres on 2 Hornbeams (T6 & T7) Reduce Sycamore branches to clear building by 2 metres (T8) Remove 1 large dead limb hanging over the neighbouring property, and reduce branches to clear building by 2 metres on 1 Sycamore tree (T9) Reduce Sycamore branches to clear building by 2 metres (T10) Crown lift 1 Holly and 1 Sycamore by 4 meters (T11) Crown lift 2 Ash trees by 3 metres (T12 & T13) Crown lift lower branches by 4 metres on 1 Ash tree (T14) Fell dead Elm tree to ground level (T15) Fell dead Maple tree to ground level (T16) Remove 1 dead branch hanging over walkway on 1 Ash tree (T17) Crown lift branches touching bin store roof by 1 metre on Hornbeam tree (T18) Crown lift over driveway to 4 meters and car park bays to 3 metres on 2 Ash trees (T19 & T20) Reduce branch on Viburnum tree to clear building by 2 metres (T21)

T1 Beech - Remove 2 lowest small diameter branches to clear roof and lift tips to give clearance of 2.5-3m across roof T2 Beech - Remove 2 lowest small diameter branches to clear roof and lift tips to give clearance of 2.5 - 3m across garage roof and to clear dwelling. T9 Oak Remove deadwood over driveway. G11 Sycamore - Remove new growth and reduce and reshape by up to 2m T14 Coastal Redwood - Crown lift to 2.5 m over footpath T15 Scots Pine - Fell to monolith of 6m

G1 Ash & Maple reduce and re shape up to 2 meters cut back away from building over No 52 ideally to boundary. T2 Pine Crown lift to 4 meters from ground removing only the smaller branches and not limbs, cut back any lateral branches over property by up to 2 meters in order to clear roof and keeping cuts size around 75mm, cut away from lamp post by 0.5 to 1 meter.