Construction of first and second floor rear extension and creation of third floor within a new mansard roof, providing two new 1 bedroom flats with alterations to the existing residential dwelling.

Non-material amendment for change of wording to Condition 11 (Approved Document M) planning permission 21/AP/3230 dated 07/09/2022 for 'Minor material amendments of approved plans to application 17/AP/1255 granted 22/03/2018 (Construction of part 4-storey, part 5-storey development consisting of commercial space (A1/A3/A5/B1/D1) at ground floor and 26 affordable residential units above (14 x Social Rented Flats and 12 x Intermediate flats with the following mix:7 x1 bed, 11 x 2 bed, 8 x 3 bed). Re-landscaping of the public square to the east of the site.) The amendments are as follows: - Changes to the energy strategy and to achieve current technical standards approvals. - Elevational changes to the building height including alteration of location of ASHP plant on the roof and the provision of substations required for the ASHP plant. - Internal re-arrangement of service spaces at ground floor level due to addition of substation'

Details of Condition 5 (Internal Noise Levels) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of Condition 4 (Validation test regarding the sound reduction and level of insulation) pursuant to planning permission ref. no. 22/AP/2989: Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of Condition 24 'External Lighting' pursuant to planning permission ref. no. 17/AP/3070: Alterations to enable a change of use of Beltwood House (a Grade II listed building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with a new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's cottage') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. Alterations including underpinning of the existing Gate Lodge (curtilage listed building) and, ground floor extension. A comprehensive landscape strategy comprising communal and private spaces and gardens for use by residents. Car parking for 17 cars for residents and visitors. Provision of new refuse and cycle storage structures. Creation of new vehicular access on to Sydenham Hill from the south-east of the site to serve one new dwelling (new Gate House).

Variation of condition 2 (Approved Plans) of planning permission ref: 19/AP/1375 granted on 26/07/2019 for: (Variation of condition 2 of planning permission 18/AP/0475 granted on 19/10/2018 for: "Retention and refurbishment of the existing front main part of the building except its main roof. Removal of all the rear parts and main roof of the existing building. Erections of 3-storey rear extension and mansard style roof extension to the existing building. Rationalise, deepen and extend the existing basement area. Change of use of the basement in the main building from storage to commercial (B1) unit of 130m2 and first floor offices to residential (C3). Reduction of existing ground floor offices from 110m2 to 74m2. Provision of five residential units (comprising 3x2B4P and 2 studio flats) in the proposed first, second and third floor with associated amenity space and separate cycle and bins storage area for both residential and commercial units. Installation of 8 solar panels on the main roof top of the building." to allow: - Alterations (including replacement of windows) to the ground floor shopfront on both Grange Road and Grigg's Place elevation) To allow the following: - a new staircase from the stair core in the centre of the building to the roof -a new glass dome over the proposed staircase and lift shaft

Details of condition 3 (Material Samples) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.)

Retrospective application - Non material amendments to planning permission ref: 20/AP/3383 granted on19/01/2021 for:- (Details of Condition 8 (Communal Door Access Control System), as required by planning permission 17/AP/0862 (Construction of a 3-storey extension (fronting onto Highshore Road) above the existing commercial units and service yard to provide 8 residential units (6 x 2-bed flats and 2 x 3-bed flats); reconfiguration of the existing service area; associated landscaped courtyard and elevational alterations to the ground floor)) to allow the following amendments: -Replace approved Moorgate Lock with a new Panic Lock and -Change specification of the approved door with a new one.

Details of Condition no. 8 (Communal door access control system) pursuant to planning ref number: 17/AP/0862 granted for: (Construction of a 3-storey extension (fronting onto Highshore Road) above the existing commercial units and service yard to provide 8 residential units (6 x 2-bed flats and 2 x 3-bed flats); reconfiguration of the existing service area; associated landscaped courtyard and elevational alterations to the ground floor).

Non-material amendment of planning permission ref: 19/AP/1375 dated 26/07/2019 for: (Variation of condition 2 of planning permission 18/AP/0475 granted on 19/10/2018 for: "Retention and refurbishment of the existing front main part of the building except its main roof. Removal of all the rear parts and main roof of the existing building. Erections of 3-storey rear extension and mansard style roof extension to the existing building. Rationalise, deepen and extend the existing basement area. Change of use of the basement in the main building from storage to commercial (B1) unit of 130m2 and first floor offices to residential (C3). Reduction of existing ground floor offices from 110m2 to 74m2. Provision of five residential units (comprising 3x2B4P and 2 studio flats) in the proposed first, second and third floor with associated amenity space and separate cycle and bins storage area for both residential and commercial units. Installation of 8 solar panels on the main roof top of the building." to allow: - Alterations (including replacement of windows) to the ground floor shopfront on both Grange Road and Grigg's Place elevation). To allow the following amendment: 1. New layout and relocation of the staircase connecting commercial units of the basement and ground floor 2. Add two restrooms on the ground floor for commercial premises in the position where commercial cycle store was proposed. 3. Combine the commercial and residential bike storages in one room. 4. Add a new door to connect residential entrance and bike storage. 5. Add a small window at the bike storage room. 6. Add new staircases connecting residential units with the basement.