Construction of an additional floor at roof level, a single storey front and rear extension, elevational alterations to include new windows and a brick-slip system, increase in width of the current gate within existing boundary wall, and the provision of a waste and bicycle store at the front.

Varation of Condition 1 'Approved Plans' pursuant to planning permission ref no. 23/AP/1461 for the construction of a rear dormer roof extension to the main roof slope and over outrigger; including the raising of the roof ridge by 1.1.m and the contruction of a garden shed. Variation: Increase height of the boundary wall.

Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.

Variation of Condition 1 'Approved Plans' of planning permission 20/AP/3131: Demolition of the existing ground floor single storey rear extension and the construction of a new single storey side/rear extension to the ground floor flat with the installation of a boundary wall with a maximum height of 1m to the front of the property. Variation sought: 1. Change in the roof height and angle. 2. New roof light configuration. 3. Reinstatement of the existing window and entrance door. 4. Change from render to brick on the party wall to match the neighbouring building.

Non material amendment of planning permission 20/AP/3131: Demolition of the existing ground floor single storey rear extension and the construction of a new single storey side/rear extension to the ground floor flat with the installation of a boundary wall with a maximum height of 1m to the front of the property. NMA sought: Change in the roof pitch to increase the overall height and change in roof light configuration. Reinstatement of the existing window and entrance door. Change from render to brick on the party wall to match the neighbouring building.

Works to TPO trees: G1: A group of Ash, (Fraxinus excelsior) Cherry Laurel (Prunus laurocerasus), Privet and Ivy approximately 9m in height, located to the boundary adjacent to the gable end of no.1 Wickers Oake. An Oak tree (Quercus robur), has vegetation overhanging the retaining wall and is obstructing the roof and flue outlet. Works - Crown lift and laterally reduce the Ash and Oak back to suitable growth points to provide a minimum 3m clearance from the roof. Remove overhanging lower vegetation back to the boundary. T1: A Horse Chestnut (Aesculus hippocastanum) approximately 20 m in height, overhanging the boundary of no.1 Wickers Oake. Works - An aerial inspection to note any significant structural defects. Remove dead wood overhanging 1 Wickers Oake.

Partial-retrospective non-material amendment pursuant to 22/AP/0229 [Variation of Condition 1 (Approved Plans) pursuant to 21/AP/1207 [Redevelopment of the site to construct seven storey office building (Class E(g)) with roof terrace, together with ancillary cycle parking, refuse storage, including plant facilities and installation of PV panels and green roof] for the extension of sixth floor and reduction in roof terrace area, removal of basement development and relocation of cycle storage, refuse storage and ancillary facilities to ground floor level] for enlargement of plant enclosure at roof level to incorporate a pressurised smoke extract system and retrospective alteration to brick joint at the top of first floor level along boundary of 44 Loman St.

Creation of additional floor at roof level, single storey front and rear extension, elevational alterations to include new windows and an insulation render system, erection of rear outbuilding, increase in width of the current gate within existing boundary wall, and provision of waste and bicycle store to front.

T1 Lime Prune to clear roof allowing approx 1.5m clearance. Remove deadwood. Remove basal & epi to crown break. Lift remainder to 5m Located front of Child Site Reduce from building to reduce conflict with building & reduce pests entering roof Remove Basal, Epi growth & lift lower crown to 5m giving more light & vision Reduce conflict with large vehicles entering drive T2 Sycamore Reduce low extended limb over drive to bollards by reduction of approx 2.5m of branch length. Remove deadwood. Remove basal & epi growth Located right hand side of CNS driveway on front boundary Reduce extended limb over drive to reduce branch end weight & conflict with large vehicles Remove Basal & Epi growth giving better vision T3 Tulip Tree Lift to 3m Located front of IPPN building to left hand side Lift lower crown to 3m to reduce conflict with public footpath T4 & T5 Acacia Remove basal & epi growth. Lift to 3m. Remove deadwood Located left & right hand side of IPPN building ? Left & right hand side of drive Lift lower crown to 3m to reduce conflict with public footpath Removal of Basal & Epi growth giving better vision T6 Lime Remove basal & epi growth to crown break. Located rear of SGDP building to side of drive Remove Basal & Epicormic growth giving better vision and light T7 Lime Lift to 2.5 metres Located on grass to side of Ortus building Lift lower crown to 2.5m giving access along grass area for grass maintenance & pedestrian access T8 Sycamore Tidy damaged branches. Lift over drive to 4m Part of group located rear of SGDP building (currently building site) Tidy branches damaged by construction vehicles Lift lower crown to 4m to reduce risk of further damage G9 Mixed Shrubs Trim round to tidy. Clear from path & building Located side of SGDP building General maintenance to enhance aesthetics & reduce conflict with building G10 Birch, Walnut, Cedar, Plane and Sycamore Lift to 2.5m. Remove basal & epi growth Located side of SGDP building Removal of epi growth &...

Partial discharge of Condition 4 'Detailed drawings' pursuant to planning permission ref. 21/AP/0903: 'External and internal refurbishment of the lower and upper floor flats. External works include fabric repairs, removal of blacktop to front entrance steps and repairs/ replacement of stone treads, replacement of Upvc windows and doors (lower flat), redecoration of existing timber windows in a darker colour (upper flat), replacement of modern front entrance door, widening of the opening on the rear facade and new doors with side lights (lower flat), reconfiguration of the roof to the outrigger and installation of a zinc roof with rooflight (upper flat), removal of existing rooflight and installation of a new conservation style rooflight (upper flat). Reinstatement of the front boundary treatment, by the introduction of brick piers and plinth cast iron railings and gate (Revised description).'