Variation of Condition 1 (Approved drawings) for full planning permission 21/AP/2183 dated 27/08/2021 for 'Extensions and alterations to the existing building to facilitate the reconfiguration of two existing self-contained flats to form 2 x 2 bedroom flats alongside a loft conversion and roof extension' to allow: i) The former shop frontage at ground floor which was previously proposed to be repaired and redecorated is now being replaced with a more suitable entrance to both dwellings. ii) Ground floor rear fenestration has been simplified. iii) Layout of flat 2 kitchen updated and area schedule updated. iv) Rear access path removed in favour of better internal environment to flat 1. v) Materials key updated to reflect changes proposed elsewhere.

Variation of Condition 1 'Approved Plans' of planning permission reference 22/AP/2730: Variation of condition 1 (Approved Plans) pursuant to planning permission 21/AP/4724 for Construction of a part single, part two storey extension and lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwellinghouse. The amendment includes the following: small amendments to the scheme including raising the floor heights and parapet heights. The parapet height is to match the neighbours extension raising it circa 150mm from the approved drawings. Variation sought: The upper element of the extension is to be removed, leaving a single storey extension on the lower ground floor.

Details of Condition 3 'Refuse Storage' pursuant to planning permission ref. no. 22/AP/3022: Variation of condition 1 (approved plans) pursuant to planning permission 20/AP/1658 (Construction of mansard roof extension and conversion of existing building (ground floor office) into two flats, 1 x 2 bedroom at ground floor and 1 x 2 bedroom duplex at at first and second floor levels incorporating external terrace at second floor) to alter and extend the rear mansard and reduce the size of the roof terrace.

Details of Condition 4 'Cycle Storage' pursuant to planning permission ref. no. 22/AP/3022: Variation of condition 1 (approved plans) pursuant to planning permission 20/AP/1658 (Construction of mansard roof extension and conversion of existing building (ground floor office) into two flats, 1 x 2 bedroom at ground floor and 1 x 2 bedroom duplex at at first and second floor levels incorporating external terrace at second floor) to alter and extend the rear mansard and reduce the size of the roof terrace.

Details of Condition 5 (Internal Noise Levels) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of Condition 4 (Validation test regarding the sound reduction and level of insulation) pursuant to planning permission ref. no. 22/AP/2989: Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of condition 3 (Material Samples) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.)

Variation of condition 1 (approved plans) pursuant to planning permission 20/AP/1658 (Construction of mansard roof extension and conversion of existing building (ground floor office) into two flats, 1 x 2 bedroom at ground floor and 1 x 2 bedroom duplex at at first and second floor levels incorporating external terrace at second floor) to alter and extend the rear mansard and reduce the size of the roof terrace.

Variation of Conditions 1 'Approved Plans' of planning permission ref. no. 22/AP/1797: Minor Material Amendment for full planning permission 20/AP/1119 dated 11/06/2020 for Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat: - Square off the diagonal corner to the front elevation; - Extend the proposed structure to the rear by 0.48m; - Increase the internal floor to ceiling height by way of raising the structure's height; - Internal reconfiguration to provide x1 additional bedroom - Re-organisation of front and side elevation to correspond with internal reconfiguration. Proposed s73 amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Variation of condition 1 (Approved Plans) pursuant to planning permission 21/AP/4724 for Construction of a part single, part two storey extension and lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwellinghouse. The amendment includes the following: small amendments to the scheme including raising the floor heights and parapet heights. The parapet height is to match the neighbours extension raising it circa 150mm from the approved drawings. Condition Number(s): 1. The development shall be carried out in accordance with the following approved plans: 2129_010 P5 PROPOSED FLOOR PLANS; 2129_011 P5 PROPOSED ELEVATION AND SECTION PLAN; 2129_020 P2 FIRE STRATEGY 2. The development hereby permitted shall be begun before the end of three years from the date of this permission. 3. The materials to be used in the implementation of this permission shall not be otherwise than as described and specified in the application and on the drawings hereby approved unless the prior written consent of the local planning authority has been obtained for any proposed change or variation. 4. All windows on the side elevation of the ground floor extension, facing number 128 Grosvenor Terrace, shall be obscure glazed and fixed shut and shall not be replaced or repaired otherwise than with obscure glazing. The side wall of the ground floor extension facing 124 Grosvenor Terrace shall be of solid construction. Conditions(s) Removal: The client would like to make small amendments to the scheme, including raising the floor heights and parapet heights slightly for drainage reasons. The parapet height is to match the neighbours extension, which raises it circa 150mm from the approved drawings. Update condition 1( approved plans condition ) to include updated drawings