Conversion of existing residential dwelling (house in multiple occupation) to one 2-bed flat and two 1-bed flats- revised application

Details of Condition 5 (Internal Noise Levels) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of Condition 4 (Validation test regarding the sound reduction and level of insulation) pursuant to planning permission ref. no. 22/AP/2989: Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Non-material amendment to Condition 15 (Plant Noise) pursuant to 20/AP/0433 [Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development]; the amendment seeks to include wording to 'exclude emergency generator equipment' from its compliance.

Non-material amendment pursuant to 16/AP/4018 [Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development] for the construction of a fire safety maintainance enclosure.

Details of condition 3 (Material Samples) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.)

Variation of Conditions 1 'Approved Plans' of planning permission ref. no. 22/AP/1797: Minor Material Amendment for full planning permission 20/AP/1119 dated 11/06/2020 for Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat: - Square off the diagonal corner to the front elevation; - Extend the proposed structure to the rear by 0.48m; - Increase the internal floor to ceiling height by way of raising the structure's height; - Internal reconfiguration to provide x1 additional bedroom - Re-organisation of front and side elevation to correspond with internal reconfiguration. Proposed s73 amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of condition 7 (security measures) pursuant to planning permission 16/AP/4018 (Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4: The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c) to provide 44 no flats and 4 no townhouses and partial demolition of a boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); a part four, part 6 storey building to provide 72 no. flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level, together with car parking, hard and soft landscaping, and other associated works incidental to the development.)