Variation of Condition 1 'Approved Plans' of planning permission 20/AP/3131: Demolition of the existing ground floor single storey rear extension and the construction of a new single storey side/rear extension to the ground floor flat with the installation of a boundary wall with a maximum height of 1m to the front of the property. Variation sought: 1. Change in the roof height and angle. 2. New roof light configuration. 3. Reinstatement of the existing window and entrance door. 4. Change from render to brick on the party wall to match the neighbouring building.

Non-material amendment to condition 2 (approved plans) of planning permission dated 18.08.2015 ref. 14/AP/2922 for: "Variation of Condition 2 (approved plans) of planning permission 12/AP/3558 dated 04/06/2013 for the 'Demolition of existing buildings and erection of a replacement building of five to eight storeys in height (max height of 27.5m), plus basement, comprising 53 residential units, 633 sqms of retail floorspace (Use Class A1) and 767 sqms of office floorspace (Use Class B1), disabled parking spaces and roof top landscaped amenity areas'. Proposed changes incorporate: - Alterations to internal floor plan layouts and core layouts. - Realignment of window and door positions to correct inaccuracies with plans. - Removal of brick pillars to balconies and provision of opaque glass balconies. - Increase in height of building by 150mm to accommodate lift overrun. - Increase in A1 floorspace from 643.2sqm to 721.9sqm. - Reduction in B1 floorspace from 670.3 to 645.64sqm. - Alteration to building line/arrangement at Ufford Street/Boundary Row junction." The non-material amendment comprises the extension of the existing plant enclosure located on the seventh floor of Block B to accommodate an additional condenser unit to support the operation of the commercial uses.

Resubmission of detail of Condition 5 Part (i) (Disabled Access -to provide redefined design to the access lane) pursuant to planning permission ref: 21/AP/0200 granted for: 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20/02/2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - Revised basement and ground layout and roof geometry - Removal of Condition 6 (Cycle Storage) - The external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - Screens, and painted masonry external walls around the boundary. - Revised Basement Impact Assessment'

Variation of Condition 1 (Approved Plans) of planning permission ref. no. 21/AP/0200 for: (Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment) to allow the following changes: -Refinement of the design of the previously approved rooflights, reducing them in size, omission of a rooflight over staircase and addition of a small rooflight over the utility room.

Variation of Conditions 1 'Approved plans' and 6 'Noise impact assessment' of planning permission 22/AP/0103 dated 28/04/2022 for the 'Construction of a single storey side-rear extension with a pergola to the rear and an 'L-shaped' rear dormer extension, in conjunction with the raising of the roof ridge by 420mm and the installation of two rooflights on the front roof slope; the installation of an enclosed air source heat pump and photovoltaic panels on the roof of the dormer; the restoration of the original brickwork to the front of the property and the installation of horizontal tiled cladding to the rear; the installation of new aluminium framed windows throughout, including two Juliet balconies to the rear; and the removal of the existing front boundary wall and the addition of a timber bin store and metal planters to the front garden'. The changes include increasing the size of the acoustic enclosure for the air source heat pump and revising the wording of Condition 6 to allow for a representative Background sound level at the nearest noise sensitive premises to be used and the Specific plant sound level to be 5 dB(A) or more below the background sound level in this location, opposed to 10 dB(A) or more.

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/2528 for Demolition of existing rear two storey outrigger and construction of ground floor side and rear extensions and lower ground floor rear extension The amendment seeks the following: reduction of scope to the rear ground and first floor extension. The total area reduction in terms of GIA footprint at ground floor level is 13sqm and 3.9sqm at first floor respectively. The depth of the extension has been considerably reduced to 3.6m. - Boundary fence/wall with 321 Lordship Lane : The boundary wall/fence due to being in poor condition and at risk of collapsing is to be rebuilt. - As a result of the reduction in extension depth the flank wall of the proposed extension is to now be built astride to this boundary wall, as shown on the amended architectural plans. - First floor, rear elevation : Reduction in depth of the first floor massing, commensurate with the reduction at ground floor. Omission of the window to the splayed corner. - Side extension : Introduction of a rooflight within the flat roof of the side extension in lieu of the exposed timber rafters indicated on the approved scheme.

Details of Condition 5 (Disabled Access), as required by planning permission 21/AP/0200 dated 12/05/2021 for - 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Details of Condition 3 - details of a Sustainable Urban Drainage System (SUDS) required by planning permission dated 12/05/2021 [LBS Ref 21/AP/0200] for 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Details of Condition 4 (details of the means of enclosure for all site boundaries) as required by planning permission 21/AP/0200 dated 12/05/2021 for - 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Retrospective variation or removal of conditions 1, 3, 4, 5 and 6 pursuant to planning permission 18/AP/1978 for 'Creation of a basement area and single storey rear extension to enlarge the existing two bed lower ground floor flat to a three bed flat; Single storey side/rear extension to existing two bed flat at upper ground floor level; creation of an enlarged hardstanding area; provision of combined refuse and cycle storage; construction of front boundary wall with railings; provision of new vehicular access.' The amendments include: - Revision of condition 1: vary design to rear elevation, layout of roof terrace and front yard to the upper ground floor - Removal of Conditions 3, 5 and 6: details of proposed trees, arboricultural method statement and hard and soft landscaping scheme - Removal of Condition 4: details of privacy screen on the roof terrace