Removal of Condition 2 (Occupation to be ancillary and incidental to enjoyment of dwellinghouse at 2 Darwin Street) and Condition 3 (Details of new fenestration and rooflights) attached to planning permission 95/AP/0175, for: Use of former public lavatories for domestic purposes ancillary to the single dwelling house at 2 Darwin Street, together with the erection of new boundary wall This Removal of Conditions application is submitted simultaneously with a separate Deed of Release application, 22/AP/2448.

Demolition of existing dwelling and garage, and construction of a 4-bedroom house with outbuilding and associated landscaping, amenity space and car parking with replacement boundary wall.

Construction of a two-storey and roof accommodation 3 bedroom dwelling on land adjacent to 1 Etherow Street and raising of the boundary wall

Variation of Condition 11 (Tree Planting) pursuant to 19/AP/1941 [Demolition of the existing detached dwelling and construction of x4 houses (two pairs of semi-detached houses) comprising basement, ground, first and second floor attic levels and associated landscaping and parking for up to two cars per dwelling] The amendment seeks the removal of x 2 existing Dead Trees to be replaced with 1 x Holly (Ilex aquifolium Van Tol) and 1 x Golden Elm Tree ( Ulmus × hollandica 'Wredei') on the north western boundary.

Resubmission of detail of Condition 5 Part (i) (Disabled Access -to provide redefined design to the access lane) pursuant to planning permission ref: 21/AP/0200 granted for: 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20/02/2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - Revised basement and ground layout and roof geometry - Removal of Condition 6 (Cycle Storage) - The external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - Screens, and painted masonry external walls around the boundary. - Revised Basement Impact Assessment'

Proposed installation of a heatpump on the second floor balcony of an end of terrace dwellinghouse, within 1m of the property boundary

Variation of Condition 1 (Approved Plans) of planning permission ref. no. 21/AP/0200 for: (Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment) to allow the following changes: -Refinement of the design of the previously approved rooflights, reducing them in size, omission of a rooflight over staircase and addition of a small rooflight over the utility room.

Details of condition 7 (security measures) pursuant to planning permission 16/AP/4018 (Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4: The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c) to provide 44 no flats and 4 no townhouses and partial demolition of a boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); a part four, part 6 storey building to provide 72 no. flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level, together with car parking, hard and soft landscaping, and other associated works incidental to the development.)

Details of Condition 6 (Surface Water Drainage Strategy), as required by planning permission 16/AP/4018 (Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4: The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c) to provide 44 no flats and 4 no townhouses and partial demolition of a boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); a part four, part 6 storey building to provide 72 no. flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level, together with car parking, hard and soft landscaping, and other associated works incidental to the development.)

Minor material amendment to planning permission ref. 22/AP/0673 (Conversion of two flats to one single family dwellinghouse; construction of a ground floor side infill and rear extension; a first floor side extension; an L-shaped rear dormer roof extension with a roof terrace at second floor level; and the installation of 1x rooflight to the front roofslope) to amend the design of the ground floor rear extension to consist of a pitched roof and to raise the party wall. The changes include: - To change the design of the ground floor rear extensions roof from a flat roof to a pitched roof design; and - to increase the eaves height on the boundary with No 37 from 2.5m to 3m and to increase the maximum height of the extension.