Details of Condition 13 (Plant noise), as required by planning permission 14/AP/2922 (Variation of Condition 2 (approved plans) of planning permission 12/AP/3558 dated 04/06/2013 for the 'Demolition of existing buildings and erection of a replacement building of five to eight storeys in height (max height of 27.5m), plus basement, comprising 53 residential units, 633 sqms of retail floorspace (Use Class A1) and 767 sqms of office floorspace (Use Class B1), disabled parking spaces and roof top landscaped amenity areas'. Proposed changes incorporate: - Alterations to internal floor plan layouts and core layouts. - Realignment of window and door positions to correct inaccuracies with plans. - Removal of brick pillars to balconies and provision of opaque glass balconies. - Increase in height of building by 150mm to accommodate lift overrun. - Increase in A1 floorspace from 643.2sqm to 721.9sqm. - Reduction in B1 floorspace from 670.3 to 645.64sqm. - Alteration to building line/arrangement at Ufford Street/Boundary Row junction.)

Details of Condition 5 (BREEAM), as required by planning permission 14/AP/2922 (Variation of Condition 2 (approved plans) of planning permission 12/AP/3558 dated 04/06/2013 for the 'Demolition of existing buildings and erection of a replacement building of five to eight storeys in height (max height of 27.5m), plus basement, comprising 53 residential units, 633 sqms of retail floorspace (Use Class A1) and 767 sqms of office floorspace (Use Class B1), disabled parking spaces and roof top landscaped amenity areas'. Proposed changes incorporate: - Alterations to internal floor plan layouts and core layouts. - Realignment of window and door positions to correct inaccuracies with plans. - Removal of brick pillars to balconies and provision of opaque glass balconies. - Increase in height of building by 150mm to accommodate lift overrun. - Increase in A1 floorspace from 643.2sqm to 721.9sqm. - Reduction in B1 floorspace from 670.3 to 645.64sqm. - Alteration to building line/arrangement at Ufford Street/Boundary Row junction.)

Variation of Condition 1 'Approved Plans' of planning permission LBS reg no 15/AP/4244 - Variation of Condition 2 (approved plans) and 4 (landscaping) of planning permission 12/AP/2220, granted on appeal for: 'Erection of six 2/3 storey terraced houses (each 3 bedroom with an additional home, office room and amenity area at second floor level) and a detached 2 storey house (3 bedroom); with new access created from Talbot Road and new access road and hard and soft landscaping' to allow the following changes: -Adjustments to the road and houses levels to prevent damage to tree roots -Adjustment to the angle of the mono-pitch roof from approved 25 degrees to 20 degrees -Reduction in the height of the new approved boundary fence at the site from approved 2m to 1.8m -Replacement of the approved rear brick wall to courtyard facing the railway with timber panels fencing -External wall to bedroom 2 to be aligned with external wall of living room below (courtyard side) to increase the width of bedroom 2 to be the same as the living room underneath

Non material amendment to planning permission 19/AP/1975 dated 11th May 2020 for 'Refurbishment of existing office building including new facades, the addition of a part 1, part 3 storey rooftop extension plus rooftop plant. The proposal comprises office uses at all floor levels with complementary, active and flexible uses (A1/A2/A3/B1a/D1/D2 excluding Education; Places of Worship; Public Hall; Law Courts; Music and Concert Venues; Dance and Sports Hall; Swimming Baths; Skating Rink; and Bingo Hall) at first floor, ground and lower ground floor, with associated access, landscaping, roof terraces and cycle parking (REVISED DESCRIPTION)'. The proposed amendment is as follows: minor amendment to the floor plans, elevations and sections previously approved and pursuant to Condition 1 of planning permission ref: 19/AP/1975 - to reflect a minor adjustment to the facade line in order to simplify the brick support and overall performance of the building. This change includes moving the approved facade line inwards (112.5 mm) to sit closer to the boundary line.