Details of Condition 5 'Sample Panels' required by planning permission 19/AP/1276 granted by appeal APP/A5840/W/19/3242451 'The development proposed is erection of 3 storey roof extension to provide 5 residential units, upgrading of façade, minor reconfiguration of existing flats Nos. 3, 8, and 9, and replacement of existing windows.'

Variation of Conditions 1 'Approved Plans' of planning permission ref. no. 22/AP/1797: Minor Material Amendment for full planning permission 20/AP/1119 dated 11/06/2020 for Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat: - Square off the diagonal corner to the front elevation; - Extend the proposed structure to the rear by 0.48m; - Increase the internal floor to ceiling height by way of raising the structure's height; - Internal reconfiguration to provide x1 additional bedroom - Re-organisation of front and side elevation to correspond with internal reconfiguration. Proposed s73 amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Non material amendment of planning permission 17/AP/4546, for: "Demolition of existing building and erection of a part 5, 8 and 9 storey plus basement mixed-use development (max height 29.98m) comprising 2,351 sqm (gia) of flexible workspace (Use Class B1) and 84 residential apartments (Use Class C3) with associated amenity space and ancillary infrastructure". NMA sought: to the latest approved Roof Plan (ref. IR41-HC-XX-RF-DR-A-PL1010 - S2) to include Air Source Heat Pump Condenser Units in the rooftop plant area for use by the commercial workspaces.

Details of Condition 3 'Air Quality Assessment' as required by planning application 21/AP/0054, for: "Erection of a mansard roof extension to provide 9 new residential dwellings (C3), through the removal and replacement of the original butterfly roof structure and parapet together with reinstating the Victorian architectural details on the facade, improvements to the existing refuse facilities and cycle storage".

Details of Condition 4 'Overheating Assessment' as required by full planning application 21/AP/0054, for: "Erection of a mansard roof extension to provide 9 new residential dwellings (C3), through the removal and replacement of the original butterfly roof structure and parapet together with reinstating the Victorian architectural details on the facade, improvements to the existing refuse facilities and cycle storage".

Non-Material Amendment for planning application 19/AP/5500 dated 19/11/2019 for Re-modelling of existing 4th floor penthouse and erection of a one storey roof top extension to provide three residential units (use class C3), at 4th & 5th floor level; refurbishment and extension of basement and ground floor level, with new basement, to provide three flexible commercial units (use class B1/A1/A2), alongside refurbished front and rear facades, cycle parking and other associated works. The proposed changes can be summarised as follows: - Amendments to internal door positions to improve usability of internal space and to comply with fire regulations; -Slight amendments to the vent shaft to align with the position on the floor above and to comply with fire regulations; -Amendments to roof lights to improve symmetry and internal light; -Addition of a wardrobe; -Reconfiguration of the staircase to comply with fire/building regulations; -AOV relocated due to structural requirements; - New indicative position of PV panels due to structural requirements.

Alterations to roof including construction of new dormer windows to front and rear, repair and refurbishment of existing fenestration, erection of rear extension at first and second floor levels, refurbishment and alterations including removal of historically unsympathetic fabric to reinstate courtyard at rear. Part of ground floor level in use as office space to continue to be used as office as well as studio workspace with remainder of property being retained as single residential unit.

Alterations to roof including construction of new dormer windows to front and rear, repair and refurbishment of existing fenestration, erection of rear extension at first and second floor levels, refurbishment and alterations including removal of historically unsympathetic fabric to reinstate courtyard at rear. Part of ground floor level in use as office space to continue to be used as office as well as studio workspace with remainder of property being retained as single residential unit.

Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Non-material amendment for planning application 19/AP/7103 dated 27/11/2020 for erection of a part-1, part 2-storey rear extension to create three additional residential units. Creation of a roof terrace on the first floor flat roof extension. Flat B - Open a new entrance for the ground floor flat from the side. Close side window. Flat C - Change door for window on rear elevation. Flat D - Close side window Flat E - Close sky light