Variation of Condition 1 (Approved drawings) for full planning permission 21/AP/2183 dated 27/08/2021 for 'Extensions and alterations to the existing building to facilitate the reconfiguration of two existing self-contained flats to form 2 x 2 bedroom flats alongside a loft conversion and roof extension' to allow: i) The former shop frontage at ground floor which was previously proposed to be repaired and redecorated is now being replaced with a more suitable entrance to both dwellings. ii) Ground floor rear fenestration has been simplified. iii) Layout of flat 2 kitchen updated and area schedule updated. iv) Rear access path removed in favour of better internal environment to flat 1. v) Materials key updated to reflect changes proposed elsewhere.

Non material amendment of planning permission 19/AP/5383: Retention of a 4 storey building with basement, and external alterations. Class A1 retail unit at ground floor with 6 flats (3 x 2 bed and 3 x studio) above. NMA sought: 650mm high parapet as indicated on the approved planning drawings is not possible and the best that can be achieved, given the concrete slab and roof finish build up, is 900mm. New drawing submitted shows the Corium brick slip parapet at 900mm instead of 650mm.

Details of Condition 4 -Cycle storage as required by planning permission 20/AP/1750 dated 24/08/2020 for Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three roof lights to the principal roof plane, to facilitate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.

Details of Condition 5 -Domestic refuse Storage as required by planning permission 20/AP/1750 dated 24/08/2020 for Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three roof lights to the principal roof plane, to facilitate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.

Details of Condition 3- Facing Materials as required by planning permission 20/AP/1750 dated 24/08/2020 for Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three rooflights to the principal roof plane, to faciliate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.

Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three rooflights to the principal roof plane, to faciliate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.