Non-material amendment pursuant to 16/AP/4018 [Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development] for the construction of a fire safety maintainance enclosure.

Variation of condition 1 'approved drawings' for planning permission reference number 21/AP/3568: Variation of a Condition 1 Approved drawings for planning permission reference number: 19/AP/1116 dated 18/10/2019 for demolition of existing public house (Use Class A4) and construction of new, four storey plus basement mixed-used building comprising basement and ground floor drinking establishment (Use Class A4) with 8 residential units (x4 studio flats, x3 one bedroom flats and x1 two bedroom flat) (Use Class C3) on first, second and third floor levels with balcony amenity spaces and associated cycle and refuse storage. Condition 1 to be varied to reference the amended plans to include: - To increase the height of the building by 1.27m to increase the internal floor to ceiling heights of each unit from 2.4m to 2.5m. - Addition of louvres to add ventilation ot the commercial unit - Reduction of the commerical floorspace from 120sqm to 113sqm to allow for wall construction and plant equipment. - Increase in the basement floor height from 2.4m to 2.5m, reduction of the basement floor area from 148sqm to 124sqm. - The cast stone cladding is to be replaced with white brickwork - The cast stone sills and coping will be replaced with PPC aluminium coping and sills in a colour to match the glazing - Amendment to location and size of the AOV and roof access; - Provision of 2no. condenser units at roof level; - Reduction in size of amenity areas to flats 3, 6 and 8 by 1 sqm - Reduction in size of amenity area to flat 7 by 0.5 sqm. Condition 9 to be confirmed to reflect the findings in the Noise Report.

Non-material amendment required by planning permission 19/AP/5846 for the Construction of 4 storey residential building for 8 new council homes comprising of 2 x 1 bed flats and 6 x 2 bed flats and landscaping improvements on former car park site adjacent to 1-34 Heaton House. Installation of 8 no Heat pumps at roof level

Non-material amendment following planning permission 21/AP/4724 (Construction of a part single, part two storey extension at lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwelling house) to: Add skylights to the lower ground floor (LGF) and upper ground floor (UGF) extension to maximise natural light into the space; Increase the floor level of the lower ground floor by 200mm to reduce excavation works and aid with drainage issues; Increase the height of the LGF parapet to match the height of the neighbours ( No. 124) and help with the internal floor to ceiling height; Slightly increase the height of the UGF parapet by 150mm to help with floor to ceiling height; Change the layout of the front LGF courtyard to match No. 124s with a bike store and steps running parallel to the house.

Variation of Condition 6 pursuant to planning permission 21/AP/3255 dated 10/02/2022 for 'Construction of a two-storey rear extension in connection to the conversion of a single dwelling house into 2x self-contained flats. Ground floor to be converted into a 2x bedroom flat and the first floor to be converted into a 3x bedroom flat. Construction of a roof terrace above the flat roof of existing extension'. The amendment seeks the following: removal or change of condition 6 and to allow parking permits.

Variation of a Condition 1 Approved drawings for planning permission reference number: 19/AP/1116 dated 18/10/2019 for demolition of existing public house (Use Class A4) and construction of new, four storey plus basement mixed-used building comprising basement and ground floor drinking establishment (Use Class A4) with 8 residential units (x4 studio flats, x3 one bedroom flats and x1 two bedroom flat) (Use Class C3) on first, second and third floor levels with balcony amenity spaces and associated cycle and refuse storage. Condition 1 to be varied to reference the amended plans to include: - To increase the height of the building by 1.27m to increase the internal floor to ceiling heights of each unit from 2.4m to 2.5m. - Addition of louvres to add ventilation ot the commercial unit - Reduction of the commerical floorspace from 120sqm to 113sqm to allow for wall construction and plant equipment. - Increase in the basement floor height from 2.4m to 2.5m, reduction of the basement floor area from 148sqm to 124sqm. - The cast stone cladding is to be replaced with white brickwork - The cast stone sills and coping will be replaced with PPC aluminium coping and sills in a colour to match the glazing - Amendment to location and size of the AOV and roof access; - Provision of 2no. condenser units at roof level; - Reduction in size of amenity areas to flats 3, 6 and 8 by 1 sqm - Reduction in size of amenity area to flat 7 by 0.5 sqm. Condition 9 to be confirmed to reflect the findings in the Noise Report.

Minor material amendment to planning permission 18/AP/0581 (Demolition of the existing public house; construction of a new five storey building with a public house at ground floor level with nine flats above providing 5 x 1-bedroom, 3 x 2-bedroom and 1x 3-bedroom units.) to increase the overall building height by 300mm by raising the ground floor level x 450mm and reducing the bar ceiling level x 150mm