Partial demolition with facade retention, alterations to doors and windows, a part 1, part 2-storey front, side, and roof extensions, 2x ground floor rear extensions, 2x dormers, 3x rooflights, and excavation forming a basement with light well to provide additional living accommodation to an existing detached dwellinghouse with associated hard and soft landscaping; removal of 3 trees.

RESUBMISSION Construction of partial demolition with facade retention, alterations to doors and windows, a part 1, part 2-storey front, side and roof extension 2 x ground floor rear extensions 2 x dormers 5 x rooflights to provide additional living accommodation to an existing detached dwellinghouse with associated hard and soft landscaping. The proposal also includes the removal of 5 trees.

Non-Material amendment required by planning permission 20/AP/3269 Demolition of existing dwelling, and the construction of a replacement residential single-family unit (5 bedrooms) with associated landscaping, amenity space, and 2 residential car parking spaces. Alteration to rear elevation to align with adjacent properties at both sides. Alteration to orangery plan Removal of chimney Removal of front below ground garden store Revision to window proportion on all elevations Addition of rooflights to rear at both ground floor extension level and loft level Reinstatement of side entrance Reinstatement of boundary wall with No 88a, to match existing height

Construction of partial demolition with facade retention, alterations to doors and windows, a part 1, part 2-storey front, side and roof extension 2 x ground floor rear extensions 2 x dormers 7 x rooflights and excavation forming a courtyard light well and basement to provide additional living accommodation to an existing detached dwellinghouse with associated hard and soft landscaping. The proposal also includes the removal of 7 trees.

Non Material amendment for planning application 20AP0433 dated 28/10/2020 for minor material amendment to planning permission 16/AP/4018 [Approval date: 15.11.2019] 'Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development' consisting of: - One change to the design of Flaxyard Block B: - Switching the balcony/terrace balustrades from glass to solid panels; - Changes to the design of Flaxyard Block C, including: - Enlargement of building footprint on floors 04 to 05; - Small number of fenestration changes; - Reduction in size of the external cycle store, but with a separate supplementary store to now be provided; - Changes to the design of Flaxyard Block D, including: - Enlargement of building footprint on floors 01 to 03; - Reduction of floorspace of the commercial unit from 247m2 to 224.5m2; - External door changes; - Changes to landscaping and car parking arrangements. The amendment are for change of Energy Strategy from CHP to ASHPs with associated plant room and roof top plant Removal of 9 dwellings from M4(2b) classification in Condition 12

Minor material amendments to planning permission 16/AP/2051 (Refurbishment and extension of existing building, including additional floors above ground floor, ranging in height from four to six storeys, to provide 716 SqM of retail space (use class A1) and 27 residential dwelling (use class C3) (2 x studios, 4 x one bed flats, 17 x 2 bed flats, and 4 x three bed flats), landscaping, associated servicing, refuse storage and bicycle storage) for a revised Energy Statement, increase to communal amenity space, plant room to move to the fourth floor, changes to windows, internal arrangements and lift overrun structure.

Non material amendment of planning permission dated 12/11/2020 [LBS Ref 18/AP/4195] for 'Construction of two 5 -storey extensions at the end of Roderick and Antony House. The construction of a two storey roof extension above both Antony and Roderick House creating two 6 storey blocks together with the infilling of the existing central gap with a 5 storey building linking the two blocks over every floor, to create an additional 30 new dwellings (2 x Studio. 16 x 1 bed and 12 x 2 bed). The proposal would also provide a new central lift core and enhanced landscaping and associated ancillary works'. The amendment seeks the following: the building has increased in height by 550mm to accommodate the transfer structure, to align the windows on plan to match the approved elevations, to remove the side panel to each of the front door surround and replace them with a vision panel set within the new front doors.

Construction of a mansard roof extension to the existing building on the front of the site to create one residential dwelling (Class C3); external alterations to the existing building including windows and brickwork; erection of a 2-storey building comprising two residential dwellings (Class C3) to the rear of the site at lower ground and upper ground level; and associated car and cycle parking; refuse storage; landscaping and associated works.

Details of Condition 8 - detailed drawings sections and elevations (scale 1:5/ 10) for all fenestration to the new build elements (to include details of the reveals) external doors, balustrading, parapets, timber screens required by planning permission dated 28/06/2018 [LBS Ref 17/AP/3070] for 'Alterations to enable a change of use of Beltwood House (a Grade II listed building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with a new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's cottage') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. Alterations including underpinning of the existing Gate Lodge (curtilage listed building) and, ground floor extension. A comprehensive landscape strategy comprising communal and private spaces and gardens for use by residents. Car parking for 17 cars for residents and visitors. Provision of new refuse and cycle storage structures. Creation of new vehicular access on to Sydenham Hill from the south-east of the site to serve one new dwelling (new Gate House)'.

Minor material amendment to planning permission 16/AP/4018 [Approval date: 15.11.2019] 'Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development' consisting of: - One change to the design of Flaxyard Block B: - Switching the balcony/terrace balustrades from glass to solid panels; - Changes to the design of Flaxyard Block C, including: - Enlargement of building footprint on floors 04 to 05; - Small number of fenestration changes; - Reduction in size of the external cycle store, but with a separate supplementary store to now be provided; - Changes to the design of Flaxyard Block D, including: - Enlargement of building footprint on floors 01 to 03; - Reduction of floorspace of the commercial unit from 247m2 to 224.5m2; - External door changes; - Changes to landscaping and car parking arrangements.