Details of Condition 3 'Sample of Mono Histoglass' pursuant to planning permission 23/AP/0889: Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Details of Condition 5 (Detailed drawings new internal window, glazed screen, rooflights, sliding doors, railings and trellis) pursuant to planning permission ref no. 23/AP/0889 - Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Details of Condition 7 (Detailed drawings first floor fireplace) pursuant to planning permission ref no. 23/AP/0889 - Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Details of Condition 4 (detailed drawings of new joinery) pursuant to planning permission ref no. 23/AP/0889 - Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/1567 granted on 12/08/2021 for: (Minor material amendment to plans of the previously approved planning permission ref: 20/AP/1103 granted on 10/06/2020 for: (Demolition of existing single storey studio and construction of a new 2-bedroom house; together with construction of a single storey ground floor side return extension to existing dwelling house) to allow the following changes: -Installation of eighteen photovoltaic panels on the roof and of the same colour as the Zinc roof -Omission of all 7 windows from the gable end (i.e. side elevation) -Change two separate windows at each level of the rear outrigger in to a single window.

Resubmission of Details of Condition 10 (Landscaping Details) as required by planning permission 20/AP/1216 dated 24/07/2020 for 'Variation of Condition 2 (Approved Plans) of planning permission LBS ref no 17/AP/3070 for the alterations to enable a change of use of Beltwood House (a Grade II Listed Building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's Cottages') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. The proposed amendments include: - Internal alterations - Reduction in the total number of residential units from 7 to 6 by consolidating Units 02 and 05 to form one three-bed unit at ground floor (now referred to as Unit 01) - Addition of 2 no. Conservation roof lights to the rear extension of the Gate House - Replacement of consented slate roof covering with black zinc standing seam on the Gate House - Increase in the size of the Gate House lightwell'.

Details in support of Full Discharge of Condition 21 (Biodiversity roof) as required by planning permission 20/AP/1216 dated 24/07/2020 for 'Variation of Condition 2 (Approved Plans) of planning permission LBS ref no 17/AP/3070 for the alterations to enable a change of use of Beltwood House (a Grade II Listed Building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's Cottages') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. The proposed amendments include: - Internal alterations - Reduction in the total number of residential units from 7 to 6 by consolidating Units 02 and 05 to form one three-bed unit at ground floor (now referred to as Unit 01) - Addition of 2 no. Conservation roof lights to the rear extension of the Gate House - Replacement of consented slate roof covering with black zinc standing seam on the Gate House - Increase in the size of the Gate House lightwell'.

Resubmission of Details of Condition 11 (Tree Planting Details) as required by planning permission 20/AP/1216 dated 24/07/2020 for 'Variation of Condition 2 (Approved Plans) of planning permission LBS ref no 17/AP/3070 for the alterations to enable a change of use of Beltwood House (a Grade II Listed Building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's Cottages') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. The proposed amendments include: - Internal alterations - Reduction in the total number of residential units from 7 to 6 by consolidating Units 02 and 05 to form one three-bed unit at ground floor (now referred to as Unit 01) - Addition of 2 no. Conservation roof lights to the rear extension of the Gate House - Replacement of consented slate roof covering with black zinc standing seam on the Gate House - Increase in the size of the Gate House lightwell'.

Details of Condition 22 - site supervision and monitoring of the arboricultural protection measures required by planning permission 20/AP/1216 dated 24/07/2020 for 'Variation of Condition 2 (Approved Plans) of planning permission LBS ref no 17/AP/3070 for the alterations to enable a change of use of Beltwood House (a Grade II Listed Building) from a Class C2 residential institution to provide 7 apartments with external works comprising demolition of the service wing outriggers and replacement with new communal entrance. Demolition of curtilage outbuildings to the east of Beltwood House ('Stables and Worker's Cottages') and replacement with 3 No. residential units. Creation of new Gate House and a detached house within the site curtilage. The proposed amendments include: - Internal alterations - Reduction in the total number of residential units from 7 to 6 by consolidating Units 02 and 05 to form one three-bed unit at ground floor (now referred to as Unit 01) - Addition of 2 no. Conservation roof lights to the rear extension of the Gate House - Replacement of consented slate roof covering with black zinc standing seam on the Gate House - Increase in the size of the Gate House lightwell'.