Submission of details to comply with condition 4 (fencing for tree protection) attached to planning permission 22/0742/FFU for Erection of single storey rear extension and erection of first-floor extension above existing attached garage.

Change of use from amenity land to residential with relocation of side boundary and erection of a timber closeboarded garden fence

3 Ash trees on boundary fence of front footpath to be section felled and stumps ground out

Erection of a new retaining wall and fence to the sides and rear. (Retrospective).

Certificate of lawfulness (existing) for existing fence.

Certificate of lawfulness (existing) for replacement of fence on top of garden wall.

I have an oak tree in my back garden which is located some 13 meters from the house very close to the fence between myself and my neighbour. There are two dead branches on the tree, one on my side of the fence and the other that hangs over my neighbours garden. I would like to remove both of these branches to avoid any risk of falling into my garden or my neighbours garden. In addition there is a large overhanging branch over my neighbours garden (third picture) that I would like to cut back as much as is permitted.

submission of details to comply with condition 3 and 4 (Arboricultural Method Statement and Tree Protection Plan) attached to planning permission 23/0633/FFU for Erection of fences, walls and gates and associated landscaping (part retrospective).

0Q4R - Willow - pollard to a final height of 2 meters and 1 m spread from a height of 10m and 4 m spread. 0Q4R - To reduce the risk of failure due to the presence of decay 0Q4W - Mixed species - fell to ground level 20 marked dead stems 0Q4W - To reduce the risk of failure due to the presence of decay. 0SMZ - Willow - Fell all 6 stems behind the fence and eco plug 0SMZ - To reduce the risk of failure due to the presence of decay 163H - Willow - fell 3 stems to a height of 1 meter 163H - To reduce the risk of failure due to the presence of decay 163K - Willow - fell to ground level all marked stems 163K - To reduce the risk of failure due to the presence of decay 163M - Willow - Carefully fell to near ground level. 163M - To reduce the risk of failure due to the presence of decay

T1- Sycamore, H 10m, S 8m. Uneven canopy due to historically pruned away from street light. Recommend a 20% crown reduction of the whole canopy to rebalance canopy, cutting branches by up to 2m from tips. Reduction on 10m height and 8m spread will result in 8m height and 6.5m spread post works. T3- Whitebeam- Crown lift to 3m above ground level to give clearance to large vehicles. T4- Cherry, Crown lift to 3m above ground level to give clearance for pedestrians. T5- Cherry, H11m S6m. Crown reduction of whole canopy cutting branches back by up to 3m from tips to previous cut points to clear the tree away from the neighboring tree. Reducing height to 6m and spread to 4m. T6- Walnut, H10m S8m- Branches touching building blocking street light. Recommend crown reduction of the whole canopy, cutting branches by up to 2.5m from tips. Reducing height to 6m and spread to 6m. T11- Whitebeam- Crown lift to 3m from ground level to make clearance for the path and parked cars. T13-Oak H9m S9m, Tree growing from railway and over boundary fence. Branches touching the building. Recommend a crown reduction away from the building, cutting branches by up to 1.5m from tips, reducing the spread of the tree to 7m. T14 Oak, Lower branches touching the building and over hanging road. Crown lift to 5m from ground level to clear away from garages and large vehicles.