(T1) False acacia - fell; (T2) Sycamore - re-pollard to previous reduction points; (T3) Sycamore - fell; (T4) Sycamore - fell; (T5) Sycamore - re-pollard to previous reduction points; (T6) Yew - prune back overhanging branches by 0.5-1m to fence line; (T7) Norway maple - remove one stem.

Group of Sycamore trees (G1)- Cut back lower laterals overhanging neighbours property to the fence line to a height of 7.5 m ; Conifer (T2) - fell to near ground level; Ash (T3) - fell to near ground level.

Leyland Cypress (T1) - Reduce encroachment towards property to provide 2-2.5m clearance; Dead tree (T2) - Fell; Golden Rain Tree (T3) - Reduce the height and spread of the tree by up to 2m; Holly (T4) - Fell; Oak (T5) - Crown Lift to provide 4m clearance from ground level, by removing the epicormic growth from the trunk; Lime (T6) - Crown Lift to provide 2m clearance from out-building roof; Apple (T7) - Fell; Bramble and Thorn (T8) - Clear area using brush cutters and strimmers to ensure all vegetation is off the neighbouring fences. Leave arisings to compost down over time.

Sycamore (T1) - reduce lateral limbs by 3m back in line with the fence leaving a branch lengths of 1m, sever the Ivy at the base and remove any deadwood or crossing branches that could fall into the property; Sycamore (T2) - reduce lateral limbs back towards boundary line by 3m, leaving a branch length of 3m, sever the Ivy and remove any dead or crossing branches that could fall into property.

2x Eucalyptus trees (G1) - pollard back to previous points; Silver Birch (T1) - reduce x2 extended branches by 2m retaining healthy growth; Buddleia (T2) - reduce height 1 ft above fence line; Conifer (T3) - fell as close to ground level as possible.

Beech (T1) - To shorten lateral branches by 4-5m back to a point in line with Eastern boundary fence; Beech (T2) - To shorten lateral branches by 2m back to a point in line with Eastern boundary fence.

Cherry (T1) - Crown reduce by 2m, remove 2 x lower branches overhanging garden and any deadwood; Buddleia (T2) - Fell as close to ground level as possible; Cotinus (T3)- Crown reduce to previous pruning points, pruning back to inside fence line all growth overhanging No. 17; Eucalyptus (T4) - Fell as close to ground level as possible; Norway Spruce (T5)- Fell as close to ground level as possible to leave a stump.

Maple (T1) - reduce to previous points (approx 2-3m); Oak (T2) - prune back lower branches (from 9 Ascot Mews) towards fence line to height of approx 6-8m.

Damsons x 3 (T1) - Reduce back to previous reduction points, approximately 1 meter; Mimosa (T2) - Reduce crown by approximately 3 meters, trim sides to balance approximately 3 meters; Conifers x 2 (T3)- Reduce by approximately 1ft to level, lift trees by 2 meters to balance and trim side growth by 1ft; Bay tree (T4 - owned by neighbour) - Cut back overhang by approximately 1 meter to boundary; Magnolia Grandiflora (T5)- Trim by approximately 1ft; Thorn (T6 - owned by neighbour) - Reduce and reshape by approximately 2 meters; Contoneaster (T7)- Reduce to fence line by approximately 1 meter; Neighbouring Birch tree (T8)- Cut back overhang by approximately 2 meters.

Weeping Birch tree (T1)- Reduce and reshape back to the fence and building and light thin by 10%; Pillar Apple tree (T2)- Thin by 10%; Silver Maple tree (T3) - Pollard back to the old points, by 2.5m; Dead tree (T4) - Cut down to ground level; Red Robin Hedge (T5) - cut back to the old points, by 1.5m; Sycamore tree (T6) - Fell to ground level.