Proposed hip to gable roof extension with front and rear dormers, side and front single storey extension and internal alterations to an existing dwelling.

Single storey pitched roof side extension to attach to front of existing pitched roof side extension. Single storey flat roof rear extension. Demolish existing garage to rear of dwelling.

Change of use to 3 dwelling houses with associated external works to alter roof from partial hipped roof to gable end.

Additional storey/upward extension to form first floor and roof to existing single storey dwelling

Proposed external materials: - External Walls for dwellings - Marshall's Crompton buff external artificial stone - Roof - Spanish slate - External Paving - Concrete paving flags to sides and patio area. - Driveways - Resin bonded gravel - buff

Non-material amendment to planning application 20/00205/FUL including: Installation of four additional velux windows in the roof plane of the new dwelling house (two in the front and two at the rear).

Proposed outbuilding set minimum 2m from property boundary. Building to be 82sqm, with a dual pitched roof, eaves height of 2500mm, ridge height to be no more than 4000mm. The total area of ground covered by buildings, enclosures and containers within the curtilage (other than the original dwellinghouse) will not exceed 50% of the total area of the curtilage (excluding the ground area of the original dwellinghouse). The building will not be sited forward of the principal elevation of the original dwelling.

Proposed rear single storey extension, projecting 8m from rear elevation of original building, eaves height to match that of the existing building, height to be no more than 2500mm, overall height including parapet to be no more than 4000mm. Materials to be brick to match existing, single ply membrane to flat roof. Proposed side extension, width to be no more than half that of the original building, eaves height to match that of the existing building, height to be no more than 2500mm, pitch to match existing up to a maximum overall height of no more than 4000mm, due to pitch it must be flat at the top. Materials to be brick to match existing, tiles to match existing to pitched elements of roof, single ply membrane to flat part of roof. Proposed Loft extension, creating flat roof dormer to rear of the dwelling, increased size to be no more than 50 cubic meters. The addition of rooflights at the front of the house will not protrude more than 0.15m beyond the existing roof plane. Proposed Porch not exceeding 3 square meters or 3m in height. Proposed chimney to new side extension, height not to exceed ridge height of original dwelling.

Sub-division of existing dwelling into 2 separate dwellings with works to RH dwelling including demolition of existing conservatory and construction of two storey side extension and two storey/single storey rear extension, alterations to roof including raising of roof ridge height and new external steps to rear of property. Other external alterations including new access and new roof light to front elevation

Minor material amendment to approved plans (condition no.2) of approved application 18/00626/FUL (Erection of 2no residential dwellings including means of access and landscaping). Amendments to include : Plot 1 - The insertion of door to side elevation. - The installation of 2 Roof-lights into rear roof elevation. - The replacement of Horizontal Roof-lights with Vertical Roof-lights to side roof elevations. - Parapet roof changed to conventional Fascia and Soffit roof. - Porch side walls inserted. - Patio Doors changed to Windows. - Bi-fold door size increased. Plot 2 - The replacement of Horizontal Roof-lights with Vertical Roof-lights to the front and side roof elevations.