Extension of integral Garage and formation of new roof, replacement of non-original windows and doors, enlarged opening to create patio patio doors to side elevation, and addition of 2no. rooflights to rear elevation of house roof (part retrospective).

Works to Thorn House include remove and replace slates where required, remove flashing and replace where required, Supply and fix new facsimiles to dormers as indicated on plan and detail drawings, Renew leadwork to spandrel panels code, All flat roofs to rear to be stripped, check for rot, timber repaired where necessary and supply and install new flat roof system to include new deck, VCL, tapered insulation overhaul of gullies, parapet stones to be lifted and roof covering to be over the wall head and existing parapets reinstated. Works to Thorn Court include remove flashing and replace where required, remove and replace slates where required.

Partially demolish existing garage to side of house. Build new two storey side and rear pitched roof extension.

Reconstruction and enlargement of existing rear dormer roof extension to existing dwelling house.

A single storey flat roof rear extension including roof lantern which would extend beyond the rear wall of the original house by 4.5metres for which the maximum height would be 3.0metres and for which the height of the eaves would be 2.4 metres.

Non-material amendment to planning permission 19/00374/FUL including: - House Type C Gable End Windows Removed for Plots 10 & 12 Only - Defenisble Walls Removed from Plots 10-18 - Apartment Roof Pitch Increased from 20 degrees to 22.5 degrees - Coloured Tarmac to be Made Non-Coloured

Non-material amendment to planning application 20/00205/FUL including: Installation of four additional velux windows in the roof plane of the new dwelling house (two in the front and two at the rear).

Proposed rear single storey extension, projecting 8m from rear elevation of original building, eaves height to match that of the existing building, height to be no more than 2500mm, overall height including parapet to be no more than 4000mm. Materials to be brick to match existing, single ply membrane to flat roof. Proposed side extension, width to be no more than half that of the original building, eaves height to match that of the existing building, height to be no more than 2500mm, pitch to match existing up to a maximum overall height of no more than 4000mm, due to pitch it must be flat at the top. Materials to be brick to match existing, tiles to match existing to pitched elements of roof, single ply membrane to flat part of roof. Proposed Loft extension, creating flat roof dormer to rear of the dwelling, increased size to be no more than 50 cubic meters. The addition of rooflights at the front of the house will not protrude more than 0.15m beyond the existing roof plane. Proposed Porch not exceeding 3 square meters or 3m in height. Proposed chimney to new side extension, height not to exceed ridge height of original dwelling.

Proposed two-storey side and single storey rear extensions to replace existing garage, rear extension and conservatory. Re-roofing over main house and side extension and over rear extension. Rendered finish to all external walls of property on completion.

Demolish existing conservatory and replace with single storey rear extension. New porch extension to front of house and roof canopy over garage door. Other external alterations including door and window to ground floor side elevation