T1 & T2- Crown reduce x 2 Ash (approx 12m height) trees by 1.5-2m, on East boundary overhanging Tibbs Hill Road T3- Deadwood large Oak (approx 12m height), on East boundary overhanging Tibbs Hill Road T4- Remove dead Pine

Listed Building Consent: Reinstatement of boundary wall and timber gate

Demolition of existing storage and construction of two storey side extension and single storey rear extension; front porch and rear patio extension; boundary treatments including retaining wall to the rear with associated landscaping works

Tree Number - T1 - Option 2 Tree Type - Oak (Quercus robur) Approx. Height - 15m Approx. Crown Spread Diameter - 12m Location - Rear garden, right hand boundary of 153 Links Way Service - Pollard Work Required - Remove all deadwood over 40mm in diameter and/or 1m in length. Reduce height to around 8m and reduce remaining growth by around 3m. Reason - Tree appears to be in decline with standing and major deadwood visible throughout the crown. Wood pecker holes visible in upper stem. Large areas of missing bark and cambium necrosis to the SW of the stem and upper crown. Only 4x live limbs visible. Large section of standing deadwood over adjacent garden is potentially dangerous. To make safer and help rebalance.

Construction of two storey dwelling with associated parking, vehicular crossover, boundary treatments and landscaping works.

Demolition of existing single storey bungalow dwelling and erection of two storey replacement dwelling, including detached single-storey double garage and swimming pool with associated green roofs, heat pumps, solar panels, binstore, parking and landscaping works; erection of balcony to the rear and front/side/rear rooflights; alterations to the driveway and boundary treatments including brick walls and sliding gate.

Tree Number - T1 Tree Type - False Acacia (Robinia pseudoacacia) Approx. Diameter at 1.5m - 54cm Approx. Height - 9m Approx. Crown Spread Diameter - 9m Location - Front garden, front boundary Service - Crown Reduction Work Required - Sever and clear a 1m section of Ivy from the circumference of the stem. Remove major deadwood over 25mm diameter and/or over 1m length. Reduce remaining crown by around 1m height and 3m spread to manage as a framework pollard to reduce end weight/lever action on brittle wood and reduce potential for further failures. Climber to inspect union at 3m to south-east for decay. Remove branch stubs and tidy wound from recent branch failure to encourage proper healing. Reason - To reduce the potential for further branch failures.

Tree number - G1 Tree type - x3 Lime (Tilia cordata) and x1 Sycamore (Acer psuedoplatanus) Approx Height - 20m Location - in rear garden of property Clearburn left hand boundary which overhangs clients Rear garden Right hand boundary beside house Service - Prune Work required- prune back the growth over the client's property to provide a clearance of approximately 3m Reason - to provide clearance from property as it is believed pests/rodents are using the trees to get into the roof of clients property

T1:Cedar (Cedrus atlantica) Location: Rear garden on the right side boundary Spec :Crown lift Lift Crown by removing one up right lower limb due to it impeding on over branches higher up in the crown (crossing/rubbing) and also remove one other lateral lower branch over the garden of Firtree Cottage, and 3 branches over the neighbours garden(Whispers) to Lift Crown to approximately 3.5 metres from ground level to prevent excessive shading and maintain access to the terraced area in neighbouring garden

Limetree just inside property boundary, in front garden Tree requires cutting of branches to remove 5 years of growth following previous application Also general maintenance and to remove lower branches that overhang public path We would like up to 4m removed from the top of the tree to keep it under control; width wise this probably equates to 3m and covers growth over the last 5 years (since the last application and subsequent works)