The Pussy Willow tree on the boundary between 3 The Rose Gardens and The Rose Gardens has lost a large bough - re-pollard whole tree to previous points by approx 4ms. I would also like permission to remove an apple tree growing too close to the double garage. photographs of both trees attached showing their site in my garden.

Tree number - G1 Tree type - x2 Hazel (Corylus avellana) Approx Height - 5m Location - Front garden Right hand boundary Service - Prune Work required- reduce height down to approximately 3m, cut back to provide approximately 1m clearance from clients house Reason - as part of continued maintenance Tree number - T1 Tree type - Laurel (prunus laurocerasus) Approx Height - 1.5m Location - Rear garden left hand boundary near house Service - Prune Work required- remove dead section (see photos) Reason - section is near to dead Tree number - G2 Tree type - Laurel (prunus laurocerasus) Approx Height - 4m Location - Rear garden Rear boundary Service - Prune Work required- reduce height down to approximately 2.5m (gutter height of adjacent shed/garage Reason - as per clients wishes Tree number - T2 Tree type - Plum (prunus spp) Approx Height - 6m Location - neighbours tree, overhangs clients Rear garden Right hand boundary and clients Apple tree Service - Prune Work required- cut back to boundary the overhang to clients garden Reason - to reduce encroachment

Tree Number - G1 - Sycamore, Ash & Oak. Approx. Height - 13m Location - see map. Service - Crown Reduction Work Required - crown reduce height by approximately 3m. Reduce side overhanging garage only by removing approximately 2m pruning to suitable growth points. Reason - as per clients wishes. e stump to a depth of approx. 200mm below the stump's current ground level and leave all grindings. Please note in-fill grindings mound will be left above ground level to allow for settling Reason - as per clients wishes Tree Number - G3 - Sycamore Approx Height - 13m Location - see map Service - Cut Back Work required - cut back over garden only by removing approximately 2-2.5m from lateral spread only. Reason - as per clients wishes. Tree Number - H1 - Laurel Approx. Height - 3m Location - See map Service - Reduce height Work Required - reduce height by approximately 0.3m. Reason - as per clients wishes. Tree Number - T1- Silver birch Approx Height - 9m Location - see map Service - Cut Back Work required - cut back 2 longest branches to shape removing approximately 1.5m Reason Reason - as per clients wishes. Tree Number - G3 - Privet Approx Height - 6m Location - see map Service - Cut Back Work required - cut back to boundary wall. Reason - as per clients wishes.

Tree number - G1 Tree type - larch Approx Height - 18m Location - Branches overhanging Larchmead - neighbouring boundary see map Service - Cut Back Work required - to cut back overhanging branches back to previous pruning points by 2-3m and remove any deadwood over 40mm in diameter or 1m in length. Also to lift the lowest limb back to main trunk of tree that over hangs the garage. Reason - as per customers wishes

1: Sycamore Tree which is 3 meters from the garage and has damaged the boundary wall and is at risk of falling. The cracks on the boundary wall have been increasing recently. Concerned about high winds may cause it to fall over the garage roof and cars on the drive way. Been advised by the tree surgeon it is best to fell this tree and stops roots from spreading. 2: Ash Tree which is on the boundary and 3 meters from the garage. This tree has a large number of branches expanding over the garage roof and also a large number of roots expanding towards the garage foundation. The tree surgeon has advised that this tree should be trimmed and have a haircut. This will protect the garage roof and slow the expansion of roof and provide safety.

Tree number - G1 Tree type - Elder and Honeysuckle Approx Height - 8m Location - Left hand boundary, to side of garage Service - Crown Reduction Work required- Prune all overhanging growth hard back to clear garage roof. Reduce height to match neighbouring hedge removing approximately 2-2.5m. Reason - As per customers wishes, To clear structure and ease future maintenance

Part retrospective: Construction of lower ground floor side and rear extensions, side extension to ground floor including extension to roof and conversion of garage into habitable accommodation, front porch, side and rear infill extension to roof to form crown roof and insertion of front and rear dormers and rooflights; alterations to the land levels and boundary treatments including replacement of timber gate with metal gate; landscaping works and stepped access to the front

Sycamore - by garage - crown lift over garage (3m over garage roof line) Hollies by garage - reduce by half in height (reduce by 5-6m to safeguard the integrity of the garage) Hedgeline - on side boundary - (trim back the face by 0.5-1m and crown lift by 2.5m to facilitate for new planting) Laurel - Cut back and crown lift (by 2m) Yew - Cut back and crown lift (by 2m)

1.Front Garden,Side Adjoining 53 Russell Rd Sycamore tree have overgrown 100% far higher than the house structure. We propose removing all dead wood and trimming the overall height to 30-50% along this boundary line to restore safe distance from the house and remove risk of falling branches in 53 RS driveway. The trees will be shaped with the sycamore higher than the conifers but allow the conifers to grow back and allow sun on the grass. 2.Front Garden,Side Adjoining 53 Russell Rd - Illustrates fallen dead branches which hit the roof and wall structure. 3.Front Garden,Side Adjoining 53 Russell Rd 4.Front Garden,Side Adjoining 53 Russell Rd 5.Front Garden,Side Adjoining 53 Russell Rd Image 3, 4 and 5 Illustrates fallen dead branches covering the ground. All to be cleared. 6.Front Garden,Side Adjoining 53 Russell Rd 7.Rear Garden,Side Adjoining 53 Russell Rd Illustrates dying conifers. 8.Front Garden,Side Adjoining 49 Russell Rd Multiple trees have grown 100%, dead wood branches have fallen on the garage roof structure causing damage and leakage. We propose trimming a shaping to allow 30 -50% reduction 9.Rear Garden Conifer has completely died and needs removing. 10.Rear Garden,Side - Adjoining 49-53 Russell Rd 11.Rear Garden/Side - Adjoining 49-53 Russell Rd12.Rear Garden/,Side - Adjoining 49-53 Russell Rd 2 large Oak trees on either side have multiple dead branches and low branches, which have fallen during medium high winds. A large willow tree stood between these trees but collapsed 2 years ago. The willow tree impacted the growth of the oaks, causing an imbalance in growth, with the trees leaning to one side.We propose removing all dead wood, low branches and trimming slightly to rebalance. 13.Rear Garden Dead apple tree to be removed 14.Rear Garden Dead falling pear tree to be removed. 15.Rear Garden Fallen oak branch with garden waste to be removed.

G1 - 2x Lime (Tillia x europea) - Front garden, Front boundary Approx Height - 16m Work required- Remove basal/epicormic growth as close to base as possible Reason - As part of regular cyclical maintenance, to give clearance to drive and footpath adjacent G2 - Cypress (Cupressus sp.) and Philadelphus - Front garden, Right hand boundary Approx Height - 3m Work required- Trim growth hard back to edge of drive (retain green foliage cover on Cypress) and prune to give 0.5m clearance from garage Reason - As part of regular cyclical maintenance, to give clearance to drive and structure G4 - 2x Cypress, 1x Cotoneaster, 1x Yew, 1x Holly - Rear garden, Left hand boundary Approx Height - 2-3m Work required- Trim all hard all round without losing green foliage cover and retaining best form Reason - As part of regular cyclical maintenance G5 - 2x Leyland Cypress (x Cupressus leylandii) - Rear garden, Rear boundary Approx Height - 15m Work required - Lift crowns to give around 2m ground clearance Reason - To prevent obstruction/ease access and tidy. T1 - Ash (Fraxinus excelsior) - Rear garden, Right hand boundary Approx Height - 11m. Approx Crown Spread Diameter - 8m Work required- Reduce crown all round by upto 1.5m, pruning to suitable growth points/branch fork junctions. Reason - To give clearance to adjacent houses while keeping good form and balance