G1 - Woodland Tree Line - Located on boundary, to rear/side of No. 64 Boundary Way. Consisting of 2x Mature Sycamore shown as T1 & T2, located close to the boundary line, with considerable overhang to property and garden area of no.64. Reduce overhanging laterals to reduce overextended limbs of Sycamore tree by 4.5M. Remove or carry our end-weight reduction to lower limbs in close proximity to house roof line, to provide suitable crown clearance from roofline of property block. To alleviate crown encroachment and light filter issues to property and garden, while reducing end weight to crown, reducing risk of limb failure to over extended limbs. Fell X1 Self-set Sycamore T3, located close to fence boundary. height approx 6/7m Fell and remove due to low value and poor siting growing under established trees. Further crown growth will likely cause continual conflict to adj property and boundary.

Ash - T1 - Re-Pollard to old points as before - maintain to smaller size Cotoneaster -T2 - Reduce by 3-4 mts - maintenance

T1 - Sycamore (Acer psuedoplatanus) - Rear garden of Corner Croft Approx Height - 15m Work required- Crown reduce the south-west side of tree by removing approximately 2-3m as guidance but pruning to suitable growth points to maintain trees best form Reason - to improve signal to clients satellite dish

The branches of the tree are touching my property and need to be cut back. Also the long branches are blocking views from the property and interfering with the security of the property The tree is a Magnolia. I want to cut back the branches my 2m to stop damage to my property.

T1: Reduce Poplar in rear garden by approx 5-6m all over to create a smaller, balanced crown and minimise the risk of failure at compressed union at base of tree. Reduction of the crown will lessen lever forces on the union as well as reduce the wind resistance created by the crown. The L/H limb is heavily weighted towards the public footpath and is long enough reach right across it .

T65 listed as 25 Hampermill Lane to be positioned at 27 Hampermill Lane. Silver Birch (Betula pendula) tree. Work specification: Propose a complete removal of the deceased Silver Birch tree to mitigate the potential safety hazards and protect the surrounding properties. 2 oak tree saplings have been planted last year.

We would like to apply for the following beech trees at the front of our garden. Full crown reduction to previous pruning points (30%) or 2 to 3 metres and 3.5 metres lift from the ground. We would like to ensure that the shape of the trees are kept and allow light into the house. Previous approved application 15/0214/TPO. PP03946513

30 percentage reduction in the tree that falls 8 meters from the property as well as trimming the dead branches from the two other beech trees. The tree surgeon suggested 2.5m for the branches reduction. The crown reduction will be for 2.5m for height and width.

T1 - T6 Beech trees. Crown reduction by 1.5 m height and width to maintain trees and allow light.

T1 - Beech Approx. Height - 18m Work Required - Section dismantle tree to near ground level Reason - tree has a large cavity present at base.