Tree Number - T1 Tree Type - Cedar Approx. Height - 14m Location - front garden Service - Crown Reduction Work Required - Crown reduce by removing approximately 2m from all over pruning to suitable growth points. Reason - as part of continued maintenance Tree number - G1 Tree type - Holly & Privet Approx Height - 5m Location -rear garden right hand boundary Service - Fell and treat Work required - Fell as close to ground level as possible and treat with one application of glyphosate only, to prevent regrowth Reason - As per clients instructions

Cherry Tree located at the front of the property has significant fungus/erosion and is now hollow at the core presenting significant risk to collapse in a high use area, we therefore wish to replace this tree Ash Tree located on the rear boundary is suffering from Ash Die Back resulting in a large section falling without warning, this poses a significant risk to our neighbours young children who are always playing in the garden we therefore wish to remove this tree Fir Tree located on the rear boundary near end of life and restricting growth of nearby Cherry Tree we therefore wish to remove the nearly dead Fir Tree The has all been viewed and advised by Oaklands (arborist)

G1 - Group of Hornbeams - reduce lateral growth extending over pool by 1.5m to prevent branches and leaves falling over pool and causing damage. G2 - Sycamore and Ash - reduce back towards boundary line by 1.5m to contain spread and lean. G3 - Group consisting of 2 Sycamore and 2 Ash - reduce back from garden by 1.5m to contain spread and lean

G1 - Woodland Tree Line - Located on boundary, to rear/side of No. 64 Boundary Way. Consisting of 2x Mature Sycamore shown as T1 & T2, located close to the boundary line, with considerable overhang to property and garden area of no.64. Reduce overhanging laterals to reduce overextended limbs of Sycamore tree by 4.5M. Remove or carry our end-weight reduction to lower limbs in close proximity to house roof line, to provide suitable crown clearance from roofline of property block. To alleviate crown encroachment and light filter issues to property and garden, while reducing end weight to crown, reducing risk of limb failure to over extended limbs. Fell X1 Self-set Sycamore T3, located close to fence boundary. height approx 6/7m Fell and remove due to low value and poor siting growing under established trees. Further crown growth will likely cause continual conflict to adj property and boundary.

Tree Number - G1 Tree Type - Sycamore x3 Approx. Height - 12m Location - rear boundary of the willows Service - Repollard Work Required - Re-pollard back to previous pruning points by removing approximately 5-6m from height and 3m from sides. Reason - as part of continued maintenance Tree Number - G2 Tree Type - Beech Approx. Height - 14m Location - see map Service - Crown Reduction Work Required - Reduce height by up to 3m and lateral spread on all sides by up to 2m pruning to suitable growth points. Reason - as per clients wishes.

T7 Red horse chestnut to reduce lateral growth by approximately 1.5m. The tree has spread laterally over the years with some larger limbs protruding. With the new development next door there is also a fair amount overhanging the boundary line. The aim would be to reduce the tree to create a more compact balance crown that doesn't impeed on the neighbours property as much whilst providing more light to the front of No.47

T1 & T2- Crown reduce x 2 Ash (approx 12m height) trees by 1.5-2m, on East boundary overhanging Tibbs Hill Road T3- Deadwood large Oak (approx 12m height), on East boundary overhanging Tibbs Hill Road T4- Remove dead Pine

Tree Number - T1 - Option 2 Tree Type - Oak (Quercus robur) Approx. Height - 15m Approx. Crown Spread Diameter - 12m Location - Rear garden, right hand boundary of 153 Links Way Service - Pollard Work Required - Remove all deadwood over 40mm in diameter and/or 1m in length. Reduce height to around 8m and reduce remaining growth by around 3m. Reason - Tree appears to be in decline with standing and major deadwood visible throughout the crown. Wood pecker holes visible in upper stem. Large areas of missing bark and cambium necrosis to the SW of the stem and upper crown. Only 4x live limbs visible. Large section of standing deadwood over adjacent garden is potentially dangerous. To make safer and help rebalance.

Tree number - G1 Tree type - x3 Lime (Tilia cordata) and x1 Sycamore (Acer psuedoplatanus) Approx Height - 20m Location - in rear garden of property Clearburn left hand boundary which overhangs clients Rear garden Right hand boundary beside house Service - Prune Work required- prune back the growth over the client's property to provide a clearance of approximately 3m Reason - to provide clearance from property as it is believed pests/rodents are using the trees to get into the roof of clients property

Limetree just inside property boundary, in front garden Tree requires cutting of branches to remove 5 years of growth following previous application Also general maintenance and to remove lower branches that overhang public path We would like up to 4m removed from the top of the tree to keep it under control; width wise this probably equates to 3m and covers growth over the last 5 years (since the last application and subsequent works)