On northern boundary On common T1-Beech(Fagus sylvatica) -cut back all overhanging branches ONLY back to boundary line up to 8m above ground level to allow 4m separation from building On common land T2-English Oak(Quercus robur) -cut back all overhanging branches ONLY on inbound side by up to 3m from tip to close to boundary line up to 6m above ground level-this will also help rebalance tree On east facing main lawn area T3-Large Beech(Fagus sylvatica) -reduce crown by 25%(4m from tips) to suitable growth points -reduce back lateral branch length to match(2m) -lift crown by 2m removing lowest branches back to main trunk collar Works to reduce overall height of tree to reduce overshading of proposed re-landscape garden T4-Beech(Fagus sylvatica)-small volunteer' specimen from larger tree -section fell to ground level-tree has poor aesethic appearance as has been shaded out by large tree and in turn due to its' current size is now shading out the larger tree; owner intends to re-plant with smaller indiginous species during proposed extensive re-landscaping works On boundary in Cherry Laurel hedge T5-Sycamore(Acer pseudoplatanus)-long-time dead-heavily covered in ivy growth -straight fell to ground level -dismantle at ground level and remove from site for disposal

Tree number - T1 Tree type - Oak (Quercus robur) Approx Height - 16m Location - Rear garden, Left hand boundary Service - Section dismantle Work required- Section dismantle tree to ground level. Cut stump as close to tree's current ground level as possible and treat with glyphosate to prevent regrowth. Reason - Tree is in decline with only one live branch still visible at time of visit. Potential hazard in adverse weather conditions. Tree number - G1 Tree type - 2x Cypress and 1x Rhododendron Approx Height - 3-6m Location - Rear garden, centre Service - Fell and grind Work required- Fell and grind out stumps to a minimum of 250mm below the stumps current ground level and leave all stump's arising to allow for ground settlement. Reason - To open up rear section of garden, allow mature and specimen trees adequate space and to allow re-establishment of lawn area. Tree number - SG1 (4x small stumps) Location - Rear garden, Left hand boundary Service - Grind out the stumps to a minimum of 250mm below the stump's current ground level and leave all grindings. Please note in-fill grindings mound will be left above ground level to allow for settling. Reason - to allow hard landscaping. Tree number - T2 Tree type - Whitebeam (Sorbus aria) Approx Height - 9m Location - Rear garden, Right hand boundary Service - Crown Reduction Work required- (previously reduced) Reduce crown by up to 3m in height and 2m spread, pruning to suitable growth points/branch fork junctions. Reason - To maintain at a reasonable size for the location, allow more light and reduce encroachment over adjacent garden.