T1 Ash - reduce overhanging laterals by 2m to lessen weight on branches extending over summerhouse. Photograph indicates the stems the client would like to be removed to create more light to the garden underneath. T2 Ash - reduce overhanging laterals by 2m to lessen weight on branches extending over summerhouse T3 Hazel - remove x 5 stems encroaching garden to contain and improve light T4 Cotoneaster - reduce crown by 40% (2.5m) - to reinvigorate tree T5 Hawthorn - reduce crown by 20% (1.5m) - to contain spread G1 Row of Conifers - remove side laterals extending over garden back to boundary line to improve light

Tree Number - G1 Tree Type - Sycamore x3 Approx. Height - 12m Location - rear boundary of the willows Service - Repollard Work Required - Re-pollard back to previous pruning points by removing approximately 5-6m from height and 3m from sides. Reason - as part of continued maintenance Tree Number - G2 Tree Type - Beech Approx. Height - 14m Location - see map Service - Crown Reduction Work Required - Reduce height by up to 3m and lateral spread on all sides by up to 2m pruning to suitable growth points. Reason - as per clients wishes.

T7 Red horse chestnut to reduce lateral growth by approximately 1.5m. The tree has spread laterally over the years with some larger limbs protruding. With the new development next door there is also a fair amount overhanging the boundary line. The aim would be to reduce the tree to create a more compact balance crown that doesn't impeed on the neighbours property as much whilst providing more light to the front of No.47

We currently have a tree just over our boundary line on the canal side, to which we have been made aware by one of the house boats is far too overgrown & tall. If this tree falls it could cause serious damage to the house boats in the nearby area, or worse.

T1 - Oak (Quercus robur) Approx. Diameter at 1.5m - 0.5-1m. Approx. Height - 18m. Approx. Crown Spread Diameter - 14m Location - Front garden Front boundary right hand side Work Required - Crown reduce btp by removing between 1-2m from all over pruning to suitable growth points, remove major deadwood of more than 50mm in diameter and greater than 0.5m in length Reason - as part of continued maintenance to control and contain overall size of tree

Listed Building Consent: Repair works to the roof, brick walls, car ports and brick boundary wall

Tree Number - T1 Tree Type - Ash (Fraxinus excelsior) Approx. Diameter at 1.5m - 90cm Approx. Height - 16m Approx. Crown Spread Diameter - 18m Location - Rear garden, Rear boundary Service - Crown Reduction Work Required - Tree previously established as a framework pollard. Reduce height and lateral growth by around 3m, pruning back to most recent reduction points. Lift crown to give around 4m ground clearance all round. Reason - To maintain compact form, reduce encroachment/debris over adjacent gardens and maintain reasonable clearance over gardens.

T1 & T2- Crown reduce x 2 Ash (approx 12m height) trees by 1.5-2m, on East boundary overhanging Tibbs Hill Road T3- Deadwood large Oak (approx 12m height), on East boundary overhanging Tibbs Hill Road T4- Remove dead Pine

Listed Building Consent: Reinstatement of boundary wall and timber gate

Demolition of existing storage and construction of two storey side extension and single storey rear extension; front porch and rear patio extension; boundary treatments including retaining wall to the rear with associated landscaping works