T1: Reduce Poplar in rear garden by approx 5-6m all over to create a smaller, balanced crown and minimise the risk of failure at compressed union at base of tree. Reduction of the crown will lessen lever forces on the union as well as reduce the wind resistance created by the crown. The L/H limb is heavily weighted towards the public footpath and is long enough reach right across it .

We would like to apply for the following beech trees at the front of our garden. Full crown reduction to previous pruning points (30%) or 2 to 3 metres and 3.5 metres lift from the ground. We would like to ensure that the shape of the trees are kept and allow light into the house. Previous approved application 15/0214/TPO. PP03946513

30 percentage reduction in the tree that falls 8 meters from the property as well as trimming the dead branches from the two other beech trees. The tree surgeon suggested 2.5m for the branches reduction. The crown reduction will be for 2.5m for height and width.

T1 - T6 Beech trees. Crown reduction by 1.5 m height and width to maintain trees and allow light.

T1 - Beech Approx. Height - 18m Work Required - Section dismantle tree to near ground level Reason - tree has a large cavity present at base.

These trees are within the Conservation Area unless stated otherwise. T1 (TPO) Beech Pollard by approximately 3.0 m to previous pollard points. Revised height to be approximately 10.0 m. To maintain the structural integrity of the previous pollard points. This tree is within A1 of the TPO. T2 Sycamore Pollard to previous pollard points ? approximately 5.0 m height. T3 Leyland Cypress Fell to ground level. T4 Hornbeam Reduce by approximately 3.5 m to previous pollard points. T5 Oak Reduce height by approximately 3.0 m height to previous pollard points. Reduce 2 no. long lateral branches to within the main tree canopy. T6 Field Maple Reduce to previous pollard points. T7 Sycamore reduce by approximately 3.0 m to previous pollard points. T8 Beech Reduce height by 6.0 m to a height of approximately 8.0 m T9 Beech reduce canopy to south by 3.0 m over Sarratt Lane. G1 (TPO) 2 no. Sycamore Pollard to previous pollard points. To maintain the structural integrity of the previous pollard points. These trees are within A1 of the TPO.

Works on Oak Tree T51 (TPO 760) to reduce Crown by 30% - Crown Reduction of 3m width and 2m height. To thin Crown by 20% to reduce overall silhouette to a similar size as the previous approved application. The current size blocks sunlight from the adjacent vegetable beds in this garden and next door.

TPO760 Eucalyptus T52. To pollard eucalyptus tree back to the existing pollard points at approximately 4m from the ground. The current size blocks sunlight from fruit trees to the north. This application is requested for both a one off pollarding and also for annual pollarding to the same pollard points.

Horse Chestnut - TPO 254 - Tag 232 - remove

Beech - 1.5m crown reduction height and width to allow light into the garden and maintain the tree. Ash - fell - ash dieback