Shorten the twin leaders by approximately 4m and then shorten the other poles as necessary to leave the tree much lower and less susceptible to breakout, but still with a pyramidal shape.

T11 Scots Pine requires removing as poor specimen T12 Sycamore requires felling as dead T13 Scots Pine cut back limb to rebalance tree T15 Sycamore dead, requires felling T17 & T19 Sycamores require overhanging limbs removed and to enable fences to be changed

T1 Horse Chestnut - Proposed to reduce the overall size of the crown by one-third. This will amount to removing up to a maximum 3mtrs height from the top and up to a maximum 3mtrs in length from the side branches. All cuts are to be at 'target points'.

T1-2 2 x poplar trees with clear wing hornet holes to fell close to ground level

Sycamore Tree - On entrance to Car Park off Vicarage Drive - Reduce by 4-5m overall.

T3 Tulip Tree - carry out a repeat reduction as has been granted previously.

Trim the tree as there are a lot of debries falling off from it into our property. We are looking to trim it down just on the side that we are doing our Valleting. There are also a lot of flies and ants arising from this, which makes the area almost impossible to work in.

Common Ash. Crown reduction - reducing the height and spread of the tree by up to 3 metress. To be carried out in the Autumn.

Ornamental Apple fell due to roots lifting pavement and causing a crack to the damp proof

Pollard 4 x Lime trees