Trees: LAUREL and SYCAMORE (G1)- reduce stems to just below fence height along the rear boundary, HORSE CHESTNUT (T1)- Lower crown over parking area/ driveway. Raise crown by up to 3m max and cut back overhanging low growth back to boundary.

TREES: HOLLY (G1) - Reduce all trees to 6m; CORSICAN PINE (T2) - Deadwood Crown; OAK (T4) - Reduce height to 16m and crown radius to 4m all round; SILVER BIRCH (T5) - Fell; HOLLY & LAUREL (G7) - Remove stems leaning on fence, retop all trees to 3m; HORSE CHESTNUT (T9) - Reduce large long stem bowed out to SE back to 7m length, loose brace all stems together at c. 15m height; CYPRESS (T14) - Fell; YEW (T15) - Raise crown base to 3m.

Trees: SILVER BIRCH x3 - 30% reduction, BEECH - Fell, HAZEL - cut back to fence boundary, APPLE - 25% reduction, Tree Group - Cut back from verge by 1.5 metres, SELF SEEDED - Fell

Trees: OAK (T1) - To raise the crown of the oak tree to 4-5 metres above ground level; BEECH (T2) - to section fell to the height of the fence

Tree in Conservation Area Notification - SEQUOIA (T1) - Cut back the laterals growing towards 3 Broadwater Down by approx 2 meters back to fence line; 2 no. CONIFERS, 1 no. YEW (G2) - Cut back the laterals that grow towards 3 Broadwater Down by approx 2 meters

Trees in Conservation Area Notification - CONIFER (T1), GLADITSIA (T2), YEW x2 (T3), YEW x3 (T4), SYCAMORE (T5), CONIFER (T6), BEECH (T8) - fell to ground level; RHODODENDRON (T7) - reduce to fence height

Tree in Conservation Area Notification - Goat willow (T1) - reduce in height; Laurel (T3) - reduce in height to approx. 3m from ground level, selectively prune inner face hard back, reduce adjacent Holly, remove top from dead Ivy covered stem; Laurel (T4) - Fell selected stems to ground level, poison the Laurel stump in the step; Yew, Laurel, Holly and Sweet Chestnut (T6) - selectively lift branches to achieve 2.4m clearance in height from ground level and remove secondary stems directly below impacting on the fence wire.

Split Decision: Part A (Approved): Trees: ALDER (T13) - Reduce by 30%, SYCAMORE (T14) - Reduce by 30%-40% due to wind throw, SYCAMORE (T17) - Reduce crown by 40% and remove dead branches/limbs, PRIVET (T25) - Reduce by 1 metre, CONFIER (TA) - Fell, SYCAMORE (T29) - Remove branch, CONIFER (T6) - Prune back all branches and lift conifer branches up to fence line, ASH (TB) - Remove major deadwood, RED ROBINS - Trim side and top growth, BEECH HEDGE - Trim side and top growth. Part B (Refused): ASH (TC) - Fell to as low as possible.

TREES: To remove the small branches that have grown through the steel security fencing that surrounds the Jewson's builders merchant yard. The branches are to be removed to a height of 3.5 meters to allow materials to be stored back to the fence line.

Trees in Conservation Area Notification: Crown lift on OAK next to road to improve visibility whilst exiting car park; Removal of SYCAMORE growing through fence up into phone lines on corner of village hall; Crown lift HORSE CHESTNUT because it is a potential hazard to taller vehicles using the car park