Non-Material Amendment to Planning Permission ref. 22/02010/FUL dated 10 February 2023 for the erection of buildings for use within Class E(g)(iii), B2 and B8 including access and servicing arrangements, vehicle parking, refuse storage, landscaping, and associated works comprising of; introduction of vehicle barriers at car park entrances; replacement of 2no. dock doors at Unit 200; removal of external transport office at Unit 200; installation of double glazed single access door and window at transport office entrance at Unit 200; introduction of 1no. new footpath between the yard and transport office for new external access door at Unit 200; Relocation of M&E enclosure at Unit 200; installation of concrete base at smoking shelter at Unit 200 car park; removal of 1no. sprinkler tank at Unit 200; repositioning of retaining walls/fence; relocation of louvre position at Unit 200; relocation of refuse enclosure at Unit 200; repositioning of Unit 200 RMU enclosure to face road and boundary fence; and addition of parking hardstanding and dropped kerb to the RMU enclosure at Unit 200

Non material amendment to approved application 20/01000/FUL dated 08.10.2021 (residential development for 114no. dwellings and associated works) [as amended by 20/01000/NMC01 which revised siting of Plots 22 and 94, siting of garage for Plot 8, alterations to the garages to provide double skin walls and omit personal doors, and alterations to the ground floor openings of the Infinity House Type (plots 90-93)] to permit revised height to boundary fence between plots 23 and 79 and amendments to the boundary to plots 4 and 59 together with amendment to conditions 2, 33, 34, 37, 38 and 39 to insert the revised plan(s).

Non-Material Amendment to Planning Permission ref. 21/02745/FUL (dated 3 October 2022) as amended by 21/02745/NMC01, determined on 09.01.2023 for Non-material amendment to approved application 21/02745/FUL dated 03 October 2022 (for approval for works to provide enhancements to access and improve the aesthetics and security by providing, new boundary treatments and gates and works to ensure pedestrian paths comply with Part M of the Building Regulations together with associated works including new bin and new outbuildings with cycle store provision for resident storage.) to seek minor changes to the approved scheme to include, Additional rear fences and gates at building blocks 7-23, 25-41, and 43-59, Updated notes about existing shrubs/hedges, Retained existing outbuildings at building blocks 43-59, 61-77, and 20-36, Updated bin store style, Updated boundary style along Tavern Street, and Updated boundary style at building blocks 39-49 and 2-12.

Non-material amendment to approved application 17/00801/REM01 dated 30.10.2020 (Reserved matters for 140 dwellings (appearance, landscaping, layout and scale) pursuant to outline approval 17/00801/OUT) comprising the variation of condition 2 (plans) to amend the approved phasing strategy for the site, straighten the eastern, western and part southern site boundary fence lines, amend boundary treatments throughout the site including the removal of acoustic fencing to Plots 62 and 82 and replacement with a 1800mm high close boarded screen fence with an amendment to condition 3 to insert reference to updated phased delivery of condition requirements.

Non-material amendment to approved application 21/02745/FUL dated 03 October 2022 (for approval for works to provide enhancements to access and improve the aesthetics and security by providing, new boundary treatments and gates and works to ensure pedestrian paths comply with Part M of the Building Regulations together with associated works including new bin and new outbuildings with cycle store provision for resident storage.) to seek minor changes to the approved scheme to include, Additional rear fences and gates at building blocks 7-23, 25-41, and 43-59, Updated notes about existing shrubs/hedges, Retained existing outbuildings at building blocks 43-59, 61-77, and 20-36, Updated bin store style, Updated boundary style along Tavern Street, and Updated boundary style at building blocks 39-49 and 2-12

Application for a Non-Material Amendment to planning permission 20/00962/S7301 dated 19th October 2021. (full planning permission 20/00962/FUL for demolition of existing building and redevelopment of site to create a Bio-CNG vehicle fuelling facility comprising fuel pump islands, plant compound, landscaping, creation of new access and egress from Altofts Lane and associated development dated 4th September 2020 at Greywood Hall , Altofts Lane, Castleford WF10 5PZ) The changes are to replace the existing timber fencing at the rear western boundary with 2.4 m high v-mesh security fencing in black. The proposed fencing replicates that to be installed around the plant compound (also on the sites western boundary) and at other boundaries of the station under the current planning consent (ref: 20/00962/S7301). No other changes to the site layout are proposed

Variation of Condition 2 (Approved Plans) of application 20/01204/FUL dated 10/12/2020 [for the renovation of the existing gatehouse and to use it as a residential property] to vary the approved plans to alter the first floor internal layout, to reposition the fence around the driveway, to correct the position of T2 on the site plan, to introduce a 2.4m high timber fence to the rear of the site and to amend the position of the rear boundary of the site

Non material amendment to approved application 17/00801/OUT dated 31/07/2017 (Outline planning application (including means of access) for a mixed use development comprising of residential development (C3) (approximately 140 dwellings) and office development (B1) as amended by 17/00801/NMC01 dated 6.07.2021 (to vary the wording of condition 20) proposed amendment comprises alteration to the height of the acoustic boundary fence along the northern site boundary to increase to 3m (condition 9)

Non-Material Amendment to application 17/03159/S7301 [Variation of condition 2 (approved plans) of application Reference Number: 17/03159/FUL dated 21/02/2019 (130 dwellings with associated public open space, landscaping and car parking) to vary the approved site layout, to remove through route to adjacent development, provision of a 2.4m high timber fence to the rear of plots 1-5 and minor variations to parking and boundary treatments, dated 16th December 2020] to amend approved Site Layout

Non-material amendment to approved application 16/00992/S7301, dated 06.07.2021 (Variation of conditions 2 (approved plans), 12 (EV charging) 24 (public open space), 29 (materials), 30 (on site renewable energy generation technology) and removal of condition 6 (highway works) of approved application 16/00992/FUL dated 27.09.2016 to amalgamate revisions previously approved under application 16/02963/FUL dated 10.03.2017 [Variation of Condition 2 (Approved Plans) which includes site layout changes to incorporate house type substitution to plot 1, substitution of the Montreux house types to Palermo and amendments to the Seville house type]; application 17/00111/NMC dated 10.02.2017[Re-positioning of plots 135-149 inclusive handing of plots 44 and 47 and amendment to rear boundary of plots 37 and 38 to facilitate improvements to dwelling access's]; and application 17/00402/FUL dated 16.05.2017 [Removal of Planning Condition 6 (Highway works) relating to application 16/00992/FUL for Residential Development comprising 152 new dwellings with associated works including, access, drainage, amenity open space and landscaping] into a single composite decision with additional revisions proposed to previously approved boundaries and boundary treatments; revisions to house types Oporto, Rosas, Seville, Pareti, Bologna, Catania, Barcelona & Madrid, Vienna and wheelchair bungalow; amendments to road layout;, updates to proposed solar PV provision; provision of bollard lighting; revisions to position of proposed substation; updates to electric vehicle charging details; updates to materials schedule; and revisions to the provision of open space (part retrospective)) to amend the approved over boarded fence panel standard details to 125mm