Works to trees in a conservation area. To remove 8 conifers from the edge of the front boundary, to allow us to replace the fence which is currently falling down with a picket/palisade fence.

Works to trees in a conservation area: Name of tree: Lawson Cypress. Cut back 80% of branches to the boundary fence. The intention is to reduce the lower section of the canopy and thin out the top

Works to trees in a Conserevation area. The tree in question is in the middle of my garden (width wise) and right on the rear boundary of my property. This has caused damage to the rear fence - has fallen or has been dislodged by the tree, this is causing a significant security risk.

Works to trees in conservation area. Species unknown - reduce height to 6ft in line with fence due to tree leaning covered in ivy and likely to be dead

Works to trees in conservation area - cut back overhanging from number 23 to the fence line as per previous application 15/00148/TCA

Works to trees in the Oxhey Conservation Area - 1no. Elder tree in back left corner of garden to be removed and 2no. Ash trees along centre right fence line of garden pollarded to a low level.

Works to trees in a Conservation area - T1 - Sycamore - Fell to ground level, T2 - Elderberry - Fell to ground level, G1 - One conifer - ever greens cut down to ground level. G1 - One Shrub cut to fence height. Located on the right hand side. G2 - Two conifer trees cut to ground. G2 - Two shrubs cut to fence height. Located on the left hand side

Works to trees in conservation area - Create a 1m clearance of all vegetation within 1m of the boundary fence to the rear of 91 to 99 Queens Road, this consists of mostly regen Sycamore and Ash trees 2" to 4" DBH Cherry tree - side prune by 1m on the property side - tree to remain balanced