Works to trees in a conservation area. To remove 8 conifers from the edge of the front boundary, to allow us to replace the fence which is currently falling down with a picket/palisade fence.

Works to trees in a conservation area: Name of tree: Lawson Cypress. Cut back 80% of branches to the boundary fence. The intention is to reduce the lower section of the canopy and thin out the top

Non material amendment of planning permission 14/00959/FUL for existing as proposed window removed at ground floor level, window revision to front elevation at first floor level and boundary change from brick walling to close border timber fencing to the northern side boundary.

Works to trees under TPO 14 T1- Crown clean (removing dead, rubbing and significantly damaged branches) remove 1 x stem at 4m (SW) over service road and pathway T2- Fell 1 x stem over road and speed camera as close to tree's current ground level as possible and leave the stump in the ground, reduce remaining branches overhanging road back to fence boundary

Works to trees in a Conserevation area. The tree in question is in the middle of my garden (width wise) and right on the rear boundary of my property. This has caused damage to the rear fence - has fallen or has been dislodged by the tree, this is causing a significant security risk.

Works to trees under TPO 112- Tree No.T72 - remove 2 metres of trunk from top of tree and branches arising from base all around tree - Tree No.T71 remove 2 metres of overhanging branches from tree extending over my boundary fence from school grounds

Works to trees in conservation area - Create a 1m clearance of all vegetation within 1m of the boundary fence to the rear of 91 to 99 Queens Road, this consists of mostly regen Sycamore and Ash trees 2" to 4" DBH Cherry tree - side prune by 1m on the property side - tree to remain balanced