Variation of condition 2 (approved plans) of planning permission reference NW/21/00964/FUL to substitute the approved plan 'Proposed Plans and Elevations - A39-3L' with 'Proposed Plans and Elevations - A39-3O' due to alterations to the proposed windows to the front elevation of the main dwelling.

Two storey front extension. Ground floor front extension below the existing roof canopy. First floor extension over the existing garage. Garage conversion to habitable accommodation including the infilling of the garage door with a window and brick work, internal alterations, re-roofing/fenestration changes to the existing pool house and new external finishes

Demolish conservatory and single storey rear extension. New single storey pitched roof rear extension and internal alterations.

Change of use from Class F1 (f) to Class E (a). Installation of palisade style gates and perimeter fencing to enclose car park area. Gates and fencing to comprise one large gate (3 metres wide double gate) for vehicle access and one small gate (1.2 metres wide single gate) for pedestrian access. 29 metres of fencing to be installed around the remaining perimeter of the car park which is not protected by existing walls. Install refrigerator compressor unit (required for cold room area and office air conditioning) housed in a secure enclosure to right hand side of front of building in alcove. The compressor situated in a secluded alcove area. The compressor (measures approximately 876 centimetres x 607 centimetres x 356 centimetres) housed in a black metal meshed cage for security. Alterations and additions to existing internal demountable partitioning. Installation of carpets and laminated floors.

Listed Building Consent for a change of use from Class F1 (f) to Class E (a). Installation of palisade style gates and perimeter fencing to enclose car park area. Gates and fencing to comprise one large gate (3 metres wide double gate) for vehicle access and one small gate (1.2 metres wide single gate) for pedestrian access. 29 metres of fencing to be installed around the remaining perimeter of the car park which is not protected by existing walls. Install refrigerator compressor unit (required for cold room area and office air conditioning) housed in a secure enclosure to right hand side of front of building in alcove. The compressor situated in a secluded alcove area. The compressor (measures approximately 876 centimetres x 607 centimetres x 356 centimetres) housed in a black metal meshed cage for security. Alterations and additions to existing internal demountable partitioning. Installation of carpets and laminated floors.

Single storey side extension and front porch, exterior alterations and interior reconfigurations.

Demolition of an existing rear conservatory and erection of a single storey side and rear extension along with alterations to drainage including a new SVP to ensuite bathroom on the front elevation

Listed Building Consent to install a small wooden summer house situated to the left of the rear garden. There will be no alterations, extensions or demolition of the listed building.

Non-material amendment to condition 2 (approved plans) of planning permission reference NW/22/00273/FUL for changes to elevations of barn 4 to widen first floor window due to inadequate fire safety provision and minor alterations to internal layouts and elevations.

Amendments to planning permission reference WP/2013/0045 reducing the number of residential units from 6 to 4 including a first floor infill extension, alterations to windows and the entrance, and a covered bin store. The commercial unit Gross Internal Area to remain as approved.