Proposed realignment of existing 2.4 metre high palisade fence, new 'goods inwards' entrance gate and 6 metre x 3 metre single storey portacabin 'goods inwards' office to improve site security, traffic control, and the flow of goods entering and leaving the site.

Approval of details reserved by conditions 7 (details of the finished floor levels and ground levels of the proposed buildings on site in relation to the adjoining land and highway and any other changes proposed in the levels on the site (including sections)), 9 (a detailed scheme for the location, design and construction of acoustic noise barriers), 12 (a scheme and timetable detailing the provision of fire hydrants, sprinkler systems and their associated infrastructure), 13 (a scheme for the provision of a minimum of 10% EV charging points to be installed on site), 15 (details of all hard surfacing materials to be used in the construction of the development), 18 (full details of the secure covered cycle parking and bin/recycling storage enclosures to be provided on site in accordance with the locations shown on the hereby approved site layout plan) and 20 (details of screen walls/fences and boundary treatments) of planning permission reference NW/22/00280/FUL

Large leylandii trees bordering car park to be bought down to approximately 6ft in height to allow light and prevent possibilty of damage to cars and pedestrians in high winds allowing either fencing or a manageble hedge in their place

Listed Building Consent to replace an existing wooden fence on the left side of the garden with a new 1.8 metre high close boarded fence

Change of use from Class F1 (f) to Class E (a). Installation of palisade style gates and perimeter fencing to enclose car park area. Gates and fencing to comprise one large gate (3 metres wide double gate) for vehicle access and one small gate (1.2 metres wide single gate) for pedestrian access. 29 metres of fencing to be installed around the remaining perimeter of the car park which is not protected by existing walls. Install refrigerator compressor unit (required for cold room area and office air conditioning) housed in a secure enclosure to right hand side of front of building in alcove. The compressor situated in a secluded alcove area. The compressor (measures approximately 876 centimetres x 607 centimetres x 356 centimetres) housed in a black metal meshed cage for security. Alterations and additions to existing internal demountable partitioning. Installation of carpets and laminated floors.

Listed Building Consent for a change of use from Class F1 (f) to Class E (a). Installation of palisade style gates and perimeter fencing to enclose car park area. Gates and fencing to comprise one large gate (3 metres wide double gate) for vehicle access and one small gate (1.2 metres wide single gate) for pedestrian access. 29 metres of fencing to be installed around the remaining perimeter of the car park which is not protected by existing walls. Install refrigerator compressor unit (required for cold room area and office air conditioning) housed in a secure enclosure to right hand side of front of building in alcove. The compressor situated in a secluded alcove area. The compressor (measures approximately 876 centimetres x 607 centimetres x 356 centimetres) housed in a black metal meshed cage for security. Alterations and additions to existing internal demountable partitioning. Installation of carpets and laminated floors.

Listed Building consent for single storey side extensions and extension to a raised terrace with fencing to The Garden House to the rear of 2 Hickmire.

Proposed detached building containing 4 classrooms, sensory room, office and toilets and the removal of existing classroom mobile and existing bins relocated. 6no. former parking spaces reinstated. 2 metre high timber bin enclosure with hardstanding and new fencing and gate

Single storey side extensions and extension to a raised terrace with fencing to The Garden House to the rear of 2 Hickmire

Non-material amendment to condition 2 (approved plans) of reserved matters permission reference WP/19/00609/REM relating to Unit 1 plot: 1&2. Amendments to the car park islands as detailed on the appended masterplan 3. Curve of car park road adjusted to omit retaining wall. 4. Vehicle bay for substation moved to opposite side. 5. Bin store enlarged. 6. Extent of concrete surfacing reduced by western yard personnel gate. Gate changed to single leaf. 7. Transport Office parapet raised to provide safe roof access. 8. Louvres added for internal plant. 9. Post and rail fence adjacent to pond. 10. Gate included between publicly accessible areas and the attenuation basins. 11. Landscaping area at main entrance amended.