Variation to condition numbers 2 (Representative samples (where appropriate) and details of all external facing and roofing materials (including bricks, window frames, door frames, eaves and rainwater goods), 3 (Details of those parts of the site not covered by buildings including the parking spaces, access road, footpath, hard and soft landscaping, surface treatments and boundary treatments and 4 (No windows or other openings (other than those already approved as part of this proposal) shall be formed on all the elevations of the proposed dwellings) of planning permission reference WP/2009/0499/F.

Application seeking to vary conditions 1 (approved plans) , 4 (approved external vehicle/parking plan scheme), 5 (approved external cycle parking scheme), 6 (approved detailed landscaping scheme) and 7 approved boundary treatment scheme of reserved matters approval reference WP/20/00099/REM and seek the following variations to the approved layout and elevational plans: - change to the visitor parking and delivery configuration to provide a through vehicular route; - additional planting to create a greater separation distance between the pedestrianised plaza and vehicular area; - roof of the school has been amended to be an asymmetric form; - mass of the central section of the school has been reduced; - the two wings of the school building have been re-aligned; - the perimeter fence around the staff car park is to be omitted and CCTV poles and cameras installed; - the mass of the community centre has been reduced by reducing the double height portion of the building; - changes to the feature brickwork and fenestration of the community building; - surfacing material of the car park serving the community building to be changed from block to tarmac

1) Erection of garden room measuring (L) 6500mm x (W) 3500mm x (H) 2500mm in rear garden of property as indicated in plan, consisting of timber frame, uPVC framed glass doors/windows facing into garden - room will be insulated and there will be a partitioned W/C. Foul water removal to be connected into existing house foul water drain. Outside of building will be finished in composite and timber cladding. Room will be connected to house water and electrical supply. 2) Erection of shelter (A) measuring (L) 6000mm x (W) 3500mm x (H) 2800mm (max height of pent roof) in rear garden of property as indicated in plan. Shelter will be of timber construction with coated metal roofing. Shelter open on 3 sides facing into garden and enclosed to rear (adjacent to boundary wall). 3) Erection of shelter (B) measuring (L) 3900mm x (W) 3000mm x (H) 2500mm (max height of pent roof) in rear garden of property as indicated in plan. Shelter will be of timber construction with opaque toughened glass or polycarbonate/PVC roof. Shelter enclosed on 3 sides by existing buildings and open to front, facing into garden. 4) Works to existing workshop adjoining house to convert into living space. Work to be carried out to damp proof and insulate room and connect to existing central heating system and electrical supply. Current access door leading to neighbouring property to be blocked up from inside but existing timber door will remain to retain external appearance exactly as is now. Existing external door leading to applicants garden to be enlarged and replaced by uPVC doors. Internal personnel door to be re-instated between existing garage and barn room. 5) Replacement of all existing doors and windows with new double glazed uPVC doors & windows.