Application for listed buildings consent - a. removal garden room b. construction single storey rear extension oak framed garden room, c. demolition of existing garage, d. construction of replacement garage/storage building

Application for listed building consent - construction of annexe (following demolition of existing shed)

Application for listed building consent - a. replace external pitched roof to rear with new flat roof construction to create first floor patio and emergency egress route b. demolition of existing conservatory c. external spiral stair case and first floor balustrade d. single storey infill extension to rear e. raised decking area to side f. insertion of four new windows at ground floor west elevation g. insertion of new door and windows at ground floor level west elevation g. insertion of new door at first floor west elevation h. infill window at ground floor west elevation i. replace existing double doors at ground floor level west elevation with single door and window j. infill window at first floor level on west elevation k. removal of chimney stack and flank wall l. replacement menu board on front elevation m. internal alterations including removal of internal walls, alterations to toilet configuration, creation of openings in walls and block up on doorways

Application for listed building consent - a. detached cartlodge b. construction of wall and installation of entrance gates

Listed building application - change two aluminium sliding doors to three aluminium sliding doors on rear elevation, change approved rooflight to a velux GGL 3570H conservation pine laminated centre pivot roof window, align patio wall, aluminium clad to chimney and changes to approved static door on rear elevation of previously approved DC/20/0979/LB for a. demolish external walls to rear lean-to b. remove section of half height wall between kitchen and breakfast room c. remove modern timber studs and plate, remove timber head beam and break out modern brick plinth d. remove existing render/plaster from walls for new extension e. remove window to en-suite and block up to match existing wall construction f. remove existing modern timber beam and replace with steel beam between kitchen and breakfast room g. form flat roof structure to extension h. install new timber framed partition at first floor level, new doorway with architraves to match existing and fit new boarded and ledged door with ironmongery to match existing i. install roof light to kitchen roof and existing en-suite j. install pipework to connect kitchenette to existing SVP and foul drainage within existing bathroom k. install a new down pipe to the south elevation j. install underfloor heating to bathrooms at 1st floor l. install kitchen extract, reposition ventilation duct work and extract vent to en-suite and re-direct extract vent through tile vent in lean-to roof of ground floor bathroom m. remove external render and all associated modern substrates and replace with new substrate and lime render n. remove plasterboard ceilings to rooms within the historic core of building at ground and first floor level o. repair ceiling joists as required and infill soffits between joists with lime plaster with limewash or breathable paint finish, repairing and reinstating lathing p. remove existing modern first floor windows from rear elevation and replace with new timber casement windows

Application for listed building consent - construction of 2no. walls to create walled garden area

Application for Listed Building Consent - (i) single storey side extension (ii) remove entire chimney and attached walls (iii) repair roof following chimney removal. Internal alterations to include (i) removal of modern partition wall (ii) removal of existing lobby wall and door (iii) construction of new partition to increase the size of the lobby (iv) new door opening within WC window opening (v) new door opening within boiler room window opening (vi) infill internal boiler room door

Application for Listed Building Consent - (i) demolish external walls to rear lean-to (ii) remove section of half height wall between kitchen and breakfast room (iii) remove modern timber studs and plate, remove timber head beam and break out modern brick plinth (iv) Remove existing render/plaster from walls which are to be incorporated within new extension (v) Remove window to en-suite and block up to match existing wall construction (vi) remove existing modern timber beam and replace with steel beam between kitchen and breakfast room (vii) form flat roof structure to extension (viii) install new timber framed partition at first floor level, Form new doorway with architraves to match existing and fit new boarded and ledged door with ironmongery to match existing (ix) Install roof light to kitchen roof and existing en-suite (x) Install pipework to connect kitchenette to existing SVP and foul drainage within existing bathroom (xi) install a new down pipe to the south elevation (xii) Install underfloor heating to bathrooms at 1st floor (xiii) Install kitchen extract, reposition ventilation duct work and extract vent to en-suite and re-direct extract vent through tile vent in lean-to roof of ground floor bathroom (xiv) remove external render and all associated modern substrates and replace with new substrate and lime render (xv) remove modern plasterboard ceilings to rooms within the historic core of the building at ground and first floor level (xvi) repair ceiling joists as required and infill soffits between joists with lime plaster with limewash or breathable paint finish, repairing and reinstating lathing as necessary (xvii) Remove existing modern first floor windows from rear elevation and replace with new timber casement windows

Application for Listed Building Consent - 1 Internal works (i) removal and repositioning of new staircase, including works to floor joists (ii) removal of store room plaster and doors to landing with new balustrade to landing (iii) provision of bathroom to include new studwork, plumbing and heating (iv) exposure of historic framework to first floor corridor and bedrooms 2 and 4 with new insulation and finished with traditional lath and lime plaster (v) retaining of existing doors to extension (vi) new studwork partitions, plumbing, heating and electrical wiring in new extension. 2 External works (i) remove external outshot and make good of structure (ii) new extension of timber frame construction clad in horizontal boarding with 2no. windows and stable door (iii) lead flashings and soakers to new roof where it abuts existing gable end and making good of plaster finish