APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 730/1995, T7 and T8 T1 , Silver Birch (T7 on TPO) - Formative trim maintaining symmetry and reducing length of right lower limb by approximately 2 Metres which overhangs roof of adjacent garage and house. T2, Oak (T8 on TPO)- carry out crown thinning (20-25%).

Householder application for the proposed erection of a rear garden outbuilding, 2no. two storey side extensions, single storey rear extension, front porch extension. Following demolition of existing garage and boundary wall, removal of greenhouse/outside toilet and tree works.

SECTION 211 NOTIFICATION FOR WORKS IN A CONSERVATION AREA T1, Holm Oak � Crown thin by 15% and remove major deadwood. Reduce crown growing towards garage, drive and Skipps Cottage by 30% or 3.5m retaining the tree shape and balancing the crown. Cut Ivy at base of tree and remove epicormic growth from main trunk.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 876/1997, T1, G2, G3, G4 T1, Beech (T1 on TPO) - Crown lift to 5m. T5, Birch (G3 on TPO) - Fell. T7, Scots Pine (G3 on TPO) - Selective tip reduction of c30 overlong lateral branches to create a horizontal radial canopy spread of 5m. Crown lift to clear branches within 2.5m of the adjacent garage. T8, Scots Pine (G3 on TPO) - Selective tip reduction of c5 overlong lateral branches to create a horizontal radial canopy spread of 4m. Crown lift to clear branches within 2.5m of the adjacent garage. T11, Oak (G4 on TPO) - Crown reduction to a final height of 14m with a 6m (from 9m) horizontal radial canopy spread. T12, Oak (G4 on TPO) � Fell. T13, Birch (G4 on TPO) � Fell. T15, Hornbeam (G4 on TPO) - Reduce to 7m to allow adjacent trees to develop. T17, Oak (G4 on TPO) - Selective tip reduction of c20 overlong lateral branches to create a horizontal radial canopy spread of 8m. T18, Scots Pine (G4 on TPO) - Selective tip reduction of c10 overlong lateral branches to create a horizontal radial canopy spread of 6m. T19, Oak (G4 on TPO) - Selective tip reduction of c20 overlong lateral branches to create a horizontal radial canopy spread of 7m. T20, Birch (G2 on TPO) � Fell.

Notification for works to tree(s) in a conservation area G6, Sycamore and Laurel - Fell the two sycamores (marked with white dots) growing close to the garage to ground level and treat stumps to prevent regrowth. Prune the laurel back to ensure at least 1m clearance from the neighbour's house/building. T13, Eucalyptus - Re plant with native species, section fell in safe and controlled manner to just above ground level. T15, Sycamore - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T16, Sycamore - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T21, Sycamore - Section Fell. T23, Sweet Chestnut - Carefully and lightly clean out the crown by reducing deadwood back to hold fast size/condition. Lightly tip- reduce the over-long lateral branches by 1.5m, back to suitable growth points with final cuts of no more than 50mm. G24, Horse Chestnuts - Group of 5 stems (same root stock) growing out of compost area and suppressed. Fell to just above ground level in safe and controlled manner. G25, Sycamore Stems - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T27, Hazel - Coppice at approximately 0.25m above ground level. T30, False Acacia � Fell to just above ground level in safe and controlled manner. T31, Holm Oak - Re reduce to previous points at approximately 6m. G32, Laurel and Sycamore � Fell both semi-mature sycamores (marked with white dots) to ground level and treat stumps to prevent regrowth.

APPLICATION FOR WORKS TO PROTECTED TREE(S)TPO 787/1996-A1. T1- Scots Pine: Crown lift to 1.5 metres, remove deadwood and cut back branches over garage by 2 metres. T2- Scots Pine: Crown lifrt to 2 metres, with 4 metre canopy clearance. T3, T4 and T5- Scots Pine: Remove deadwood. T6- Scots Pine: Reduce branch tips by 1 to 1.5 metres.

Application to vary conditions 2, 3, 4, 5, 6, 7, 8 and 10 and to remove condition 17 of planning consent 201453 for the proposed erection of a 3 no. bedroom dwelling and detached double garage following demolition of the existing dwelling and detached garage. Condition 2 refers to the approved details; condition 3 to the external materials; condition 4 to a watercourse buffer zone; condition 5 to a CEMP and LEMP; condition 6 to landscaping proposals; condition 7 to tree protection; condition 8 to biodiversity enhancements; condition 10 to a flood risk assessment, and condition 17 to obscure glazing, and the variations are to facilitate internal and external changes to the proposed dwelling and allow for the proposed creation of a river cutting and wet dock, in addition to the removal of the requirement for obscure glazing on the north elevation bedroom window.

App number 213369 APPLICATION FOR THE WORKS TO PROTECTED TREE(S) TPO-0021-1970-A2 T1 Yew group- Crown lift to give 2m clearance to the garage roof and 1.5m clearance to the garage block and gutter. T2 Oak � Crown lift to give 2m clearance to the garage roof and 1.5m clearance to the garage block and gutter. T3 Sycamore � Crown lift to give 2m clearance to the garage roof and 1.5m clearance to the garage block and gutter.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO-0256-1984-A2 G1 4x Oak- Crown lift to approximately 4m by removing secondary growth only where possible. Remove epicormic growth up to 4m T1 Oak - Partial crown reduction of 4xNE sections of canopy by approximately 2m of the NE radial crown spread), leaving tree with natural crown shape for species in line with BS3998. The trees dimensions after pruning will be be approximately, Radial Crown spread to North 9m, East 8m, South 9m, West 10m. Remove epicormic growth up to 4m T2 Oak - Crown lift to approximately 4m by removing secondary growth only where possible. Remove limb to source resting on garage due to evidence of a beam split near to source. Remove epicormic growth up to 4m T3 Oak - Crown lift to approximately 4m by removing secondary growth only where possible. Partial crown reduction of S and SW lower and mid canopy by approximately 2m of the radial crown spread, leaving tree with natural crown shape for species in line with BS3998. The trees dimensions after pruning will be approximately. Radial Crown spread to North NA, East NA, South 6.5m, West 8.5m. Remove epicormic growth up to 4m

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO REFERENCE: 929/1998 T1 - Oak See report. This planning application, number 211373 is for the pollarding of T1 Oak tree location on the boundary of Arbor Lane garage and Arbor Lane. From the report T1 is in poor condition and noted as Unsuitable for retention. Due to its location on the boundary, we wish to pollard the tree rather than remove to prevent damage to the road and footpath. T1's branches are oversized and extend over the neighbour's gardens, whom also wish for this tree to be cut right back too. Thinning the tree would not resolve their concerns. We feel that the best option for tree T1 that is unsuitable for retention is to be pollarded.