APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 1829/2021, AREA 1 T1, Sweet Chestnut � Cut back 5 no. branches overhanging driveway and garage of Gorse House back to the boundary of the driveway. G2, Sweet Chestnut - Cut back lower branches of saplings overhanging driveway of Gorse House by 1m and upper branches by 2m; cut back branches overhanging garage by 2.6m. T3, Oak � Remove 2 no. branches, one 4m from base of trunk overhanging the garage roof and one 2.5m from base of trunk overhanging the garage side door. T4, Hazel � Prune away from garage roof back to previous coppice points.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 730/1995, T7 and T8 T1 , Silver Birch (T7 on TPO) - Formative trim maintaining symmetry and reducing length of right lower limb by approximately 2 Metres which overhangs roof of adjacent garage and house. T2, Oak (T8 on TPO)- carry out crown thinning (20-25%).

Notification for works to tree(s) in a conservation area G6, Sycamore and Laurel - Fell the two sycamores (marked with white dots) growing close to the garage to ground level and treat stumps to prevent regrowth. Prune the laurel back to ensure at least 1m clearance from the neighbour's house/building. T13, Eucalyptus - Re plant with native species, section fell in safe and controlled manner to just above ground level. T15, Sycamore - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T16, Sycamore - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T21, Sycamore - Section Fell. T23, Sweet Chestnut - Carefully and lightly clean out the crown by reducing deadwood back to hold fast size/condition. Lightly tip- reduce the over-long lateral branches by 1.5m, back to suitable growth points with final cuts of no more than 50mm. G24, Horse Chestnuts - Group of 5 stems (same root stock) growing out of compost area and suppressed. Fell to just above ground level in safe and controlled manner. G25, Sycamore Stems - Form into pollard by forming pollard knuckle at approximately 7m, 50mm stubs to be left to aid regrowth. T27, Hazel - Coppice at approximately 0.25m above ground level. T30, False Acacia � Fell to just above ground level in safe and controlled manner. T31, Holm Oak - Re reduce to previous points at approximately 6m. G32, Laurel and Sycamore � Fell both semi-mature sycamores (marked with white dots) to ground level and treat stumps to prevent regrowth.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO REFERENCE: ****/**** T1 � Oak - Off-site tree over hanging the garage. Selectively prune to give 3m clearance to the garage. To improve airflow and reduce moss build up. T2 � Oak - Off-site tree over hanging the house. Selectively prune to give 3m clearance to the house. To improve airflow and reduce moss build up. T3 � Oak - Canopy in contact with the roof. Lift the crown to a height of 5m all round. To give statutory clearance over Nash Grove Lane and to keep the trees balanced. Selectively prune to give a minimum 2m clearance. To give adequate clearances to the roof and aerial. T4 � Oak - Obscuring the street lamp head. Lift the crown to a height of 5m all round. To give statutory clearance over Nash Grove Lane, clear the street lamp head and to keep the trees balanced.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 898/1997, T14, T15 and T16 T1, Oak (TPO T16) - Lift the Crown to 5.5m to clear the neighbours garage roof and road; Thin the Crown 25 to 30 percent; T2, Scots Pine (TPO T15) - Two limbs are rubbing, remove end section of bottom branch to reduce weight on this limb as it rubs on the main limb. Lift Crown near to the house to prevent squirrels getting onto the roof of the dwelling. T3, Scots Pine (TPO T14) - Lift Crown about 10 percent above other trees and bushes.