SECTION 211 NOTIFICATION FOR WORKS IN A CONSERVATION AREA T1, Hazel � Cut back branches overhanging shed of no. 4 Church Lane by approx. 2m.

SECTION 211 NOTIFICATION FOR WORKS IN A CONSERVATION AREA G1, Mixed Species - Remove dead stems from ivy clad hazel to approx. 500mm from ground level; maintain clearance of lower branches over the driveway to a height of approx. 4.5m from ground level and 0.5m from kerb line. G2, Mixed Species - Prune back low branches in contact with the wall, fence to maintain a clearance of up to 1.0m where possible; prune low branches over paths to statutory height of 2.5m from ground level; prune branches over property roof to achieve a clearance of approx. 1.5m, targeting secondary points of pruning (approx. 1.5m lateral growth); remove Elder growing close to the fence and treat stump. G3, Mixed Species - Reduce tops of the Yew by approx. 2.0m from highest apical tip; trim face next to the driveway; top Beech to points of previous pruning by removing approx. 3.0m in height to leave a finished height of approx. 2.5m from ground level; trim side lateral growth on the garden side. T1, Ash - Remove lowest x 2 branches growing over the vicarage roof to source; prune branches above the vicarage to maintain a clearance of approx. 2.0m from the roof by pruning back to secondary points of pruning. G4, Mixed Species - Prune back low branches in contact with the fence to source; prune overhanging branches back to party line along entire group, to the tops of the plants; remove Elder and rose growing on the vicarage side of the fence; prune back remaining Elders back to party line and away from the fence; prune Elder to clear BT cable. T37, Horse Chestnut - Remove chestnut growing next to the fence to approx. 50mm from ground level. T38, Ash - Remove major and moderate deadwood; prune secondary branch to reduce potential notch stress by drop crotch pruning longer lower branches (see photo). T39, Lime - Raise low branches to approx. 4.0m by removing branch over shed and x 2 over neighbouring fence to source; remove x 2 low branches towards the Ash to source; raise remaining branches to approx. 4.0m from ground level by targeting secondary points of pruning; remove basal epicormic and elder. T2, Indian Chestnut - Reduce limb to the Southwest growing towards the Lime, by approx 3.0m of lateral growth; remove elders from basal area. T45, Sycamore - Reduce regrowth where squirrel damage is compromising structural integrity; remove moderate and major deadwood; maintain statutory clearance over the tow path. G5, 8 x Yew, Hazel - Maintain statutory height clearance of 2.5m over the tow path; remove moderate and major deadwood over the tow path; remove cluster of hazel in the corner of the chain-link & wooden fence. T43, Sycamore - Remove major and moderate deadwood from over the footpath. T42, Sycamore - Remove major and moderate deadwood. G6, Laurel, Yew - Prune to maintain a clearance of approx. 1.0m from the fence where possible; this will not include whole tree removal unless stems are less than 75mm in diameter; maintain statutory height clearance over public footpath. T47, Sycamore - Remove some lower understory laurels to achieve a clearance of approx. 2.0m from the base of the tree. T3, Sycamore - Remove sycamore and identified laurel stem.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO-0939-1998 G1 T1 Plane � Crown lift specified overhanging branches T2 Hornbeam � Crown lift specified overhanging branches T3 Norway Maple - Crown lift specified overhanging branches over shed T4 Norway Maple - Crown lift specified overhanging branches over shed

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 782/1996, AREA 1 T1, Oak � Cut back 2 no. highest branches facing road by 4 metres; remove lowest branch (as indicated on submitted photo) T2, Silver Birch � Cut back 2 no. branches overhanging driveway by 3 metres (as indicated on submitted photo) T3, Oak � Cut back highest branch by 4 metres and second highest branch by 3 metres; remove lowest branch (as indicated on submitted photo) T4, Scots Pine � Cut back 1 no. branch by 3 metres (as indicated on submitted photo) T5, Scots Pine � Cut back 1 no. branch by 3 metres (as indicated on submitted photo. Works amended: T1, Oak - Remove 2 x stub lower branches back to source. Remove lower fork of lateral branch over highway (reduction of approximately 5m off this branch). Reduce second branch over highway by approximately 2m to provide statutory clearance of the public highway. T1A, Birch - Crown lift removing two small secondary branches back to source to provide statutory clearance of the public highway. T2, Birch (adjacent to the driveway)- Crown lift removing or reducing smaller secondary branches as appropriate to avoid leaving stub-cut branches in order to raise canopy 2m. Reduce two extended low, lateral branches - growing in the direction of the streetlight by 1- 1.5m to reduce oscillation of extended branches following the canopy lift. T3, Oak - Remove 3 x dead or declining branches over the shed back to trunk.Reduce over-extended low, lateral branch on southwest side of canopy by up to 2m. T4, Pine - Remove dead, dysfunctional, or dangerous wood from tree canopy. T5, Birch - Small dead tree, fell to ground level.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO REFERENCE:1602/2017-T5 T5 Common Ash (Fraxinus Excelsiour) 1.lateral limb over shed to remove back to new shoot on left side. 2.One small branch on righthand side to remove to crown deadwood. Required to trim branches that�s needed and remove dead branches. General tidy up, to ensure its safety.

Application for non-material amendments to planning consent 193150 (14/01/2020) as follows: 1. Removal of porch/canopy and addition of two ground floor bay windows on principal elevation. 2.Revision of double door entry to bike shed to window and change of finish from render to brick. 3. New high level window at first floor to west elevation. 4. Minor changes to boundary wall fronting Arbor Lane. 5. Change of window colour throughout. 6. Removal of oak tree by previous owner noted on plans.

WORKS TO A CONSERVATION AREA TREE - WOKINGHAM TOWN CENTRE CONSERVATION AREA Felling of trees outlined in the sketched map. We would like to fell and remove all of the trees (including roots where possible) included in the application e.g. T1a, T1b, T1c, T2, T3 and T4. T1a, T1b, T1c - Leylandii. 3 very large trees at the front of the property blocking all light and natural heat into the front of our property. Neighbours are also in support of the removal. T2 - Holly tree. Very tall, dropping sharp leaves into our garden and causing a nuisance to our neighbours. We are expecting our first child and would like to remove the hazard. T3 - Apple tree in poor condition in the centre of the garden T4 - Laurel bush. Overgrown, would like to remove to free up space for a shed and seating area like next door (no.19).

Works to a TPO tree. TPO reference no. 782 1996 Front Garden T1) Silver Birch Betchula pendular Findings: � Tree situated in front garden, directly in front of the front door. � Mature. � Driveway and house in root protection zone and below canopy. � Historical pollard pruning technique used has created a poor crown structure, with decay present at old pruning points that are now a point of potential failure. � Tree has previously been reduced successfully to manage the crown size. Recommendations: � Reduce crown by approximately 20% removing approximately 2m from the trees hight and side growth. � Removal of all major dead wood. � Raise crown to approximately 3m by removing secondary pendular growth. Reasons For Work Listed Above � Because there is the likelihood that property may be damaged and/or for the health and safety of people/life. � A crown reduction will reduce the chance of branch failure. T2) Silver Birch Betchula pendular Findings: � Tree situated in front garden, close to house on the left hand front side as you face the building. � Medium Mature. � Historical pollard pruning technique used has created a pore crown structure, with decay present at old pruning points that are now a point of potential failure. Recommendations: "Medium Priority" � Remove dead wood. � Reduce crown regrowth by approximately 20% removing 2m from hight and 1m from side growth. Reasons For Work Listed Above � Because there is the likelihood that property may be damaged and/or for the health and safety of people/life. � A crown reduction will reduce the chance of branch/union failures. Back Garden T3) Oak Findings: � Tree situated in back RH corner of garden garden near/over pond fences and shed construction. � Mature. � Tree is leaning with a greatly unbalanced crown. Recommendations: � Remove dead wood. � Reduce lateral and upper crowns growth by approximately 20% removing 2.5m from side growth and leaning hight. � Nothing to be removed from the trees central hight or lateral growth on the up side from lean. Reasons For Work Listed Above: � A crown reduction will help rebalance tree.

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 1761/2020, AREA 1 AND TPO 796/1996, G1 T1, Lawson Cypress - Remove low branches overhanging gas shed T2, Ash - Remove branches overhanging/close to building T3, Cherry - Removing branches overhanging/close to building T4, Lawson Cypress - Remove low branches overhanging gas shed

APPLICATION FOR WORKS TO PROTECTED TREE(S) TPO 393/1988, T1 AND T2; TPO 720/1995, T1 T1, Mulberry (Wild Cherry on TPO)- Crown reduce by approximately 15%. T2, Purple Plum - Crown reduce by approximately 20%. T3, Oak (TPO 720/1995, T1)- Remove lowest limb over the shed.