Application for submission of details to comply with the following condition of planning consent 221876 dated 31/10/2022. Conditions 3 external materials, 4 ground and building levels, 5 electric vehicle charging, 6 construction method statement, 7 drainage details, 8 landscaping, 9 details of boundary walls and fences, 10 biodiversity enhancements, 12 cycle parking and 13 bin store.

Application for submission of details to comply with the following conditions of planning consent 201515 dated 25 June 2021. Conditions: 4 (Phasing); 7 (CEMP); 8 Construction Vehicles); 10 (Materials Samples); 22 (Boundary Walls and Fences); 34 (Parking Management Strategy); and 44 (Communications Plan).

Householder application for the proposed construction of new boundary fence following demolition of existing boundary fence (retrospective).

Householder application for the proposed partial conversion of garage into habitable space, repositioning of front door, other changes to fenestration and construction of new boundary fence to side of property.

Application for submission of details to comply with the following condition of planning consent 210405 dated 26/04/2021. Condition 3. External Materials. 4. Details of boundary walls and fences. 5. Drainage details. 7. Construction method statement. 8. Electric vehicle charging points. 14. Landscaping. 16. Biodiversity enhancement plan.

Application to vary condition 2,4 and 6 of planning consent 203514 for the Full planning application for the proposed conversion of bungalow to form two self-contained dwellings comprising 1 x 3 bed apartment at ground floor and 1 x 1 bed apartment at first floor. (Following recent construction of extensions permitted by application 191411) and installation of four roof lights (part retrospective). Condition 2 refers to approved details, condition 4 refers to landscaping, condition 6 refers to parking. The variation is to allow for parking layout and rear fencing separation, Landscaping in relation to parking layout and provision of scheme and revised parking arrangement

Full planning application for the proposed construction of a 3G synthetic pitch funded through the FA framework consisting of sports fencing, LED floodlights, storage container, spectator area and pedestrian access.

Works to a TPO tree. TPO reference no. 782 1996 Front Garden T1) Silver Birch Betchula pendular Findings: � Tree situated in front garden, directly in front of the front door. � Mature. � Driveway and house in root protection zone and below canopy. � Historical pollard pruning technique used has created a poor crown structure, with decay present at old pruning points that are now a point of potential failure. � Tree has previously been reduced successfully to manage the crown size. Recommendations: � Reduce crown by approximately 20% removing approximately 2m from the trees hight and side growth. � Removal of all major dead wood. � Raise crown to approximately 3m by removing secondary pendular growth. Reasons For Work Listed Above � Because there is the likelihood that property may be damaged and/or for the health and safety of people/life. � A crown reduction will reduce the chance of branch failure. T2) Silver Birch Betchula pendular Findings: � Tree situated in front garden, close to house on the left hand front side as you face the building. � Medium Mature. � Historical pollard pruning technique used has created a pore crown structure, with decay present at old pruning points that are now a point of potential failure. Recommendations: "Medium Priority" � Remove dead wood. � Reduce crown regrowth by approximately 20% removing 2m from hight and 1m from side growth. Reasons For Work Listed Above � Because there is the likelihood that property may be damaged and/or for the health and safety of people/life. � A crown reduction will reduce the chance of branch/union failures. Back Garden T3) Oak Findings: � Tree situated in back RH corner of garden garden near/over pond fences and shed construction. � Mature. � Tree is leaning with a greatly unbalanced crown. Recommendations: � Remove dead wood. � Reduce lateral and upper crowns growth by approximately 20% removing 2.5m from side growth and leaning hight. � Nothing to be removed from the trees central hight or lateral growth on the up side from lean. Reasons For Work Listed Above: � A crown reduction will help rebalance tree.

Application for submission of details to comply with the following condition of planning consent 201708 dated 16/09/2020. Condition 3. Electric Vehicle Charging. 4. Drainage Details. 5. Construction Method Statement. 6. Landscaping. 7. External Materials. 8. Details Of Boundary Walls And Fences. 16. Biodiversity Enhancement.

Application for submission of details to comply with the following condition of planning consent 191387 dated 27/09/2019. Conditions 4 Boundary walls and fences, 5 Landscaping, 6 Protection of Trees, 8 Cycle parking details, 9 Construction method statement, 10 Demolition method statement, 13 Landfill gas assessment, 14 Land contamination and 18 Minimise effects of dust.